Contents
First impressions of the Lumintop TD16
The Lumintop TD16 is delivered in a plain cardboard box, which already contains all the necessary product information on the back. Included were the Lumintop TD16, a 18650 Li-Ion battery (which is not necessarily included), a belt pouch, a lanyard and sachets containing sealing rings and an additional spare cap for the control buttons, as well as a multilingual user manual including warranty details. Unfortunately, a diffuser attachment is not included.
Play video on YouTubeThe build quality of the Lumintop TD16 is successful. The anodising of the aluminium parts is even and durable. The threads operate without play and engage very smoothly. The notches are also cleanly machined and not too sharp. The ring for the "cigar grip" consists of cleanly machined rubber, making the TD16 more grippy. Both control buttons feature a textured rubber cap that fits well. Overall, the Lumintop TD16 is very attractive and modern in design, highlighted particularly by the stainless steel bezel, the rear end cap, and the ring surrounding the control button.
According to the manufacturer, the Lumintop TD16 is also IPX-8 water-resistant up to 2 metres.
Commissioning and features
The Lumintop TD16 requires an 18650 battery, which may be included depending on the product selection. However, the torch can also be powered by two CR123A batteries. In any case, you should have a charger for 18650 batteries, as the battery cannot be charged via the torch itself!
With the battery inserted and the cap closed, the high-performance flashlight is ready to go. It can be switched on and off via the rear control knob. The function button is located on the lamp head.
In total, 6 different modes are available. A normal button press cycles through the 3 different brightness levels. A long press activates the flashing modes, which can then be switched with a short press. The flashing modes consist of a strobe mode, as well as a short and long flash mode. To switch back to brightness selection, simply press the button longer. If you turn the flashlight off and on again, the last used mode is retained.
Performance
The Lumintop TD16 is available with a Cree XM-L2 or XP-L Hi LED. Both LEDs deliver similar performance and differ mainly in their measurement values. Overall, the XP-L Hi is slightly more powerful, which is why it shines marginally brighter. I tested the variant with the XP-L Hi LED.
At the highest brightness level, the TD16 reaches a luminous flux of 920 ANSI lumens. At the lowest brightness level, the luminous flux is 20 ANSI lumens and at the medium brightness level it is 160 ANSI lumens.
The manufacturer states the range as 450 metres. In nighttime testing in an open area, I was able to verify this range. The light beam has very little scatter and is very focused. The light colour is extremely cold, producing a nice white light. Heat development remains within limits at maximum level. Based on the total capacity of the 18650 Li-Ion battery I used, a runtime of approximately 2 hours at maximum brightness is also plausible.
Our verdict
The Lumintop TD16 belongs to the higher price range, but overall offers performance and workmanship that correspond to the price. What I would have wished for at this price, however, was an additional diffuser.
Specifications
General
- Light bulb
- Cree XP-L Hi LED
- Lumens / Runtime
- 20 lumens (40 hours)
- 160 lumens (8.7 hours)
- 920 lumens (2.2 hours)
- Strobe 920 lumen (4.5 hours)
- Max Candela
- 50800cd
- Max range
- 450 metres
- 6 modes
- Low (Standard) – Medium – Strobe – Signal – Fast signal
- Dimensions
- Length
- 153mm
- Contact angle
- 38.5 mm
- Body diameter
- 25.4mm
- Weight
- 160g without batteries
- Operating voltage
- 2.8V-8.4V
- Operation with 2 x CR123A or 1 x 18650 Li-Ion
- Waterproof according to
- IPX-8 (2 meters)
What’s included
1x Lumintop TD16 1x 18650 Li-Ion battery 2x O-ring 1x spare button 1x holster 1x lanyard 1x user manual















Comments