Contents
Preface: NuForce BE6i
Ever since Apple abandoned the traditional jack socket, other mobile device manufacturers have followed suit. One solution to the problem is adapters, which allow headphones and mobile devices to remain connected. Another alternative is wireless Bluetooth headphones or earbuds. The NuForce BE6i by Optoma is such a Bluetooth earbud, which is also an evolution of the predecessor model “NuForce BE6”. Key differences include extended battery life and dust and water resistance to the IPX5 protection standard.

Design, build quality, and included accessories
The design of the in-ear headphones is chic and is aimed primarily at mobile and athletic users. Unlike other Bluetooth IEMs, such as the Apple AirPods, the earphone is connected via a flat ribbon cable. In the upper third of the right sound unit there is a 3-button remote control with a microphone and a micro-USB socket for charging the earphones. The sound bodies are made of aluminium and are comparatively large. No surprise, as quite a lot of hardware, including the battery, is housed in both units! According to IPX5 protection class, the in-ear headphones are protected against dust and “water jets from any angle”. Rain or other liquids therefore do not pose a problem for the NuForce BE6i. The ends of the sound bodies are magnetic, so the earphones can simply be worn around the neck when not in use. The engraved “NU” logo adds accents. The wearing direction is clearly marked L and R on both units.
The build quality of the NuForce BE6i is only partially acceptable. The construction of the earbuds was particularly convincing. The build quality of the cable remote control was less convincing. It is made entirely of plastic and appears to be cheaply assembled overall. In addition, the buttons do not have particularly good tactile feedback.

The scope of delivery is exceptionally generous, as is typical for Optoma NuForce. In addition to the earphones, it includes four pairs of silicone ear tips in sizes XS, S, M and L, two pairs of Comply ear tips in M and L made of memory foam, one pair of ear wings, a cable clip, a carrying pouch, a charging cable and, of course, a user manual.
Setup
The BE6i is easy to set up and can be done without problems even by non-technical users. Pressing the power button for 6 seconds activates the pairing mode. To connect a mobile device, simply select the Optoma NuForce BE6i in the mobile device's Bluetooth settings. The connection is established without entering a password. A voice notification confirms the successful connection. After each power-on, a connection to the mobile device is automatically established, unless the pairing has been removed.

Sound quality
The NuForce BE6i is equipped with one 10 mm dynamic driver in each earbud. Optoma specifies the frequency response as 20 Hz to 20 kHz. The impedance is 20 Ohm. The sensitivity is 95dB +/-3dB (1 kHz).
The NuForce BE6i presents itself as Bluetooth earphones with a (moderate) U-sound curve. As a result, the earphones still orient themselves towards the conventional consumer, but also show clear hi-fi tendencies. The bass range is only slightly boosted, but nonetheless noticeable. The bass reproduction is precise and anything but intrusive. Bass lovers will certainly miss powerful and particularly rich bass! The midrange reproduction is also successful. Mids sound particularly tangible with a colourful tone. The treble range, especially the upper treble, is also slightly boosted. The treble reproduction can be described as smooth without distorting in any way through harsh sibilants.

Detail representation is not necessarily a strength of Bluetooth headphones. Many headphones of this type tend to sound muddy. The NuForce BE6i, on the other hand, impresses with a particularly clear and, above all, noise-free music playback with a comparatively high level of detail. Support for the aptX codec allows for a more stable Bluetooth connection with a higher data rate (up to 352 kbps), which further improves sound quality. However, this requires an aptX-compatible mobile device.
Bluetooth
The Bluetooth standard is version 4.1 with EDR (Enhanced Data Rate). The following Bluetooth profiles are supported: HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4, APT-X, AAC. The earbud can remember connection data for a maximum of 8 different devices.

The Bluetooth connection quality and range are very good. Optoma states a maximum transmission range of 30 metres. The tested, loss-free range was around 20 metres. Only beyond this range did occasional dropouts occur.
Cable remote control and microphone
As mentioned previously, the cable remote control unfortunately does not win any prizes. The build quality does not match the rest of the earbuds, particularly the high-quality aluminium sound chambers. The remote control allows, among other things, control of music playback. There are a total of 3 control buttons. The middle control button is used to switch the earbuds on. As a multifunctional button, it can also be used to pause and resume songs, as well as accept, end and reject incoming calls. The other two control buttons are used for volume control. Additionally, songs can be skipped by holding the buttons down for a longer period.

Further features of the cable remote include a status LED, a micro-USB charging port and the microphone. The recording quality of the microphone is good and sufficient for making calls.
Wearing comfort
The acoustic chambers of the NuForce BE6i are comparatively heavy and large. The total weight of the earphones is 19g. When wearing the in-ear model, the rather long housings protrude significantly from the ear, which, combined with the high weight, causes the earphones to sag downwards. Readjustment was not uncommon during the listening test! The pair of ear wings included by Optoma in the scope of delivery is an advantage. The ear wings significantly improve wearing comfort and stability, so that the BE6i can also be worn comfortably during sports without any problems.

Battery
Each earphone housing contains a cylindrical 80 mAh lithium-ion battery. The measured total capacity is 135 mAh. The runtime measured at medium volume is 7 hours. The deviation at higher or lower volume is approximately +1 / -1 hours. By pressing any of the control buttons on the cable remote, you are informed about the current battery level via voice announcement and LED indicator.
The earbud is fully charged after 2 hours. As tests showed, the earbud cannot be charged with any charger. The NuForce BE6i does not get along with fast chargers, as are commonly included with most smartphones nowadays. Charging via a PC or with a 5V 1A charger, however, worked without problems.
Our verdict
The Optoma NuForce BE6i is an extremely well-sounding Bluetooth IEM, which, thanks to its moderate U-shaped frequency response curve, will appeal much more to the discerning music listener than to the average consumer. The sound is convincing, with precise bass, colourful mids and smooth highs. The level of detail and clarity are comparatively good, especially for Bluetooth earphones.
Points are deducted for the poorly implemented wired remote and the somewhat unfamiliar wearing comfort, which can, however, be significantly improved by the included ear wings.
Specifications
General
- Drivers
- Dynamic driver
- Size
- 10 mm
- Frequency range
- 20 Hz - 20 kHz
- Impedance
- 20 ohm
- Sensitivity
- 95 dB (+/- 3 dB)
Bluetooth
- Standard
- 4.1 + EDR
- Range
- up to 30 metres
- Profiles
- *HSP 1.2
- *HFP 1.6
- *A2DP 1.2
- *AVRCP 1.4
- *aptX
- *AAC
Other
- Microphone
- Yes
- Cable remote control
- Yes
- Cable length
- 550 mm
- Battery
- ~135 mAh
- Weight
- 19g
What’s included
1x NuForce BE6i 1x Case 4x pairs of silicone ear tips (XS, S, M and L) 2x pairs of Comply tips (M and L) 1x pair of ear wings 1x charging cable 1x cable clip 1x user manual





Comments