Contents
Sunseeker V3: First impressions
The Sunseeker V3 arrives securely packaged with a manageable but complete set of contents. Alongside the robotic mower itself, the box contains two green magnetic discs for multi-zone management, two five-metre lengths of magnetic tape to demarcate no-go areas, six replacement blades, an IP67-certified power supply with a ten-metre extension cable, a quick-start guide, a detailed manual, and the charging station with ground anchor.

Everything you need to get started is included, except for a roof for the station. This is only available as an option, for example at Bauhaus for 169 Euro. There are no bottlenecks regarding spare parts and accessories. Replacement blades (12 pieces for 15 Euro) or additional magnetic disks (2 pieces for 29 Euro) are also available directly at Bauhaus.

The robot itself appears high-quality processed, sporty in design and with its distinctive binocular camera even slightly reminiscent of "Short Circuit". To ensure the camera keeps a clear view even in bad weather, there is a small wiper as a nice detail. With 9.2 kg weight, the V3 is pleasantly easy to move. Underneath the device, three rotating blades work, as is common with many robot mowers. Two drive wheels provide lateral propulsion, and there is a single guide wheel at the front.

The mower is operated via a small flap. This houses a dial for the cutting height, which can be adjusted in nine levels from 20 to 60 millimetres, in 5 mm increments. The cutting width is fixed at 18 centimetres. Below the dial is a LED display with four buttons: On/Off, Start, Home and a confirmation button. The connection status (Bluetooth/Wi-Fi), battery level and schedule can be read directly on the display.

Also included are a large emergency stop button and a rain sensor.
Sunseeker V3: Installation
The Sunseeker V3 lives up to its "Ready-to-Go" approach. The charging station is secured with the included ground anchors, which is quickly done in theory. In practice, however, one should be careful. The anchors are quite sensitive, and two of them broke immediately for me on hard clay soil. It is better to gently tap them in with a hammer rather than kicking them with your foot. Sturdy screw pegs would definitely have been the better solution here.

No boundary cable needs to be laid for operation. The Sunseeker V3 also dispenses with poles or other aids for navigation. Orientation is handled solely by the binocular camera in combination with Vision-AI. Setup via the app is quick and straightforward. A mapping run, as with other models, is not necessary. From unboxing to the first run, it took me less than 15 minutes.

Those who want to mow several garden sections or avoid certain areas like flower beds or play zones cannot avoid the included magnetic plates and magnetic tape. The green markers signal to the robot where to stop or switch to another area. Technically this works brilliantly, but you have to come to terms with the rather garish green colour visually. The parts are quite large and not exactly unobtrusive in a well-kept garden.

WLAN is only required by the robot if you want to control it remotely. For everything you do directly in the garden, the Bluetooth connection is sufficient. By the way, the WLAN signal is surprisingly strong. While my smartphone has long since lost the WLAN connection in the garden, the V3 remains stably connected.
When it comes to anti-theft protection, you have to do without GPS or an integrated eSIM. Therefore, locating the device in the event of theft is not possible. At least a PIN code offers protection against unauthorised use. This must be entered directly on the device, which at least provides a certain basic level of security.

Before the Sunseeker V3 starts its first round, the lawn should not be higher than 8 millimetres. If the grass is too long, the robot may initially struggle a bit. A brief pre-cut ensures a smooth start.
Sunseeker V3: Field test
Sunseeker app
In everyday use, the Sunseeker V3 shows what it is made of, and without any unnecessary frills. The Sunseeker app (Android and iOS) is clear, albeit rather plain in design. Translations seem a bit clunky here and there, but everything is functional. There is a work log that lists exactly what the robot did and when, as well as push notifications for status changes. A schedule can also be quickly created. Although it is not particularly extensive, it works.
The Sunseeker V3 can be remotely controlled via the app using a virtual joystick. This allows you to guide it precisely to a specific spot, for example if it gets stuck or if you want to target a specific area for cleaning. What is missing is a live view from the camera or a map, as offered by some competing models. This would have made manual control even smarter.

Mowing, navigation and obstacles
During mowing, the robot moves across the lawn in random mode. This may look chaotic, but works surprisingly well in practice. There were no uncut areas with daily mowing work. However, it does not produce a neat mowing pattern.

The Sunseeker V3 can easily pass through bottlenecks from 80 centimeters wide and handles inclines of up to 22 degrees (42%) with ease too. The noise level is pleasantly low, so you can send it off on a Sunday without a guilty conscience.
The V3 also handles uneven lawn surfaces well. However, in smaller depressions it can get briefly stuck. This happened occasionally during testing, but it always managed to free itself. Tall weeds or overgrown kerbs are more problematic, as they can confuse the camera navigation. These should be kept as clean as possible.
It navigates along lawn edges pleasingly precisely. The app allows you to set how close it should get to the edge. At the lowest setting, it is about 5 centimetres, which worked quite well in our test.

The obstacle recognition via Vision AI is one of the V3's great strengths. The robotic mower reliably detects toys or scattered branches and drives around them without problems. It is additionally equipped with a collision sensor that activates if it does overlook something. In that case, it stops, moves back a short distance and corrects its route, similar to a vacuum cleaner robot.
Battery
The battery lasts around 65 minutes in practice. If the charge level drops below 30%, the V3 automatically returns to the charging station, charges for about 30 minutes, and then resumes its work. In testing, this worked smoothly every time.

Cleaning
The V3 also proves to be straightforward when it comes to cleaning. Simply spraying it with a garden hose from below is sufficient. The blades can be changed in just a few minutes using a simple Phillips-head screwdriver.
Our verdict
The Sunseeker V3 excels where many other robotic mowers fail: with genuine user-friendliness. Instead of painstakingly laying boundary wires or performing complex mapping, the robot is simply placed on the lawn, connected via the app, and is immediately ready for use. The combination of Vision AI and a binocular camera ensures precise navigation, even at edges or when encountering spontaneous obstacles. The V3 remains pleasantly quiet, handles slopes and narrow passages confidently, and can be cleaned easily if needed.
The conspicuous magnetic markers are less successful. They are difficult to integrate into the garden discreetly. There is also room for improvement in the app. There is neither a map view nor a live camera image or the option to set the cutting direction – features that are long since standard with other manufacturers. GPS or eSIM are also omitted, which limits theft protection to a simple PIN entry.
However, if you can do without this frills and are looking for a simple, quiet and intelligently navigating robotic lawn mower that explains itself almost entirely, the Sunseeker V3 offers a strong all-round package, completely without cable clutter.
Specifications
Mowing system
- Limit
- Wireless / Cordless
- Max. recommended area
- 600 m² (V3) / 1,000 m² (V3 Plus)
- Cutting height
- 20 – 60 mm (9 steps in 5 mm increments)
- Cutting width
- 18 cm
- Cutting system
- 3 rotating blades
- Mowing mode
- Random
- Edge cutting
- Supported
- Multi-zone management
- Supported
- No-go zones
- Supports (magnetic tape)
- Max. gradient
- 22° / 42 %
- Pinch points
- ≥80 cm
- Mowing speed
- 0.35 m/s
- Chopping time per cycle
- 42 min (V3) / 84 min (V3 Plus)
- Charging time
- 107 min (V3) / 79 min (V3 Plus)
Technology
- Navigation
- Vision AI
- Camera
- Binocular camera with automatic wiper
- Obstacle avoidance
- Impact sensor
- Lift sensor
- Rain sensor
- Magnetic sensor
- Floating cutting deck
Operation & Control
- User interface
- App (Android/iOS) & LED display
- Connectivity
- WLAN, Bluetooth
- App features
- Time scheduling, manual control (joystick), log display
- PIN code protection
- FOTA (firmware updates over the air)
Power supply
- Battery type
- 20 V Lithium
- Battery capacity
- 2.5 Ah (V3) / 4 Ah (V3 Plus)
- Charger
- 1.1 A (V3) / 3.0 A (V3 Plus)
- Drive system
- Rear-wheel drive
Weather & water protection
- Robot lawn mowers
- IPX5
- Charging station & power supply
- IP67
- Washable
- Underside with water hose
Noise emissions
- Noise level
- 55 dB(A)
Dimensions & Weight
- Dimensions
- 605 × 370 × 235 mm
- Weight
- 9.2 kg (V3) / 9.4 kg (V3 Plus)
Other
- Warranty
- 2 years + 1 year with registration
- Certificates
- CE, RED, NB, LVD
What’s included
1 x Sunseeker V3 robotic mower 1 x charging station 1 x power adapter 12 x fixing pins for charging station 6 x replacement blades 6 x screws for replacement blades 2 x magnetic discs 1 x magnetic strip 20 x fixing pins for magnetic strip
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 713,47 € | Go to store |








Comments