Skip to content

Anet E10 / E12 review, experiences and improvements

The Chinese DIY 3D printer manufacturer “Anet” has added a new 3D printer to its product range. The Anet E10 is an FDM printer with a frame made of aluminum profiles, and at least in terms of its design, it looks very similar to the Creality CR-10. Find all the details and see how the 3D printer performed during several weeks of testing in the following review!

Anet E10 Test Report / Review

Test results

7,7 out of 10 pointsOur score (out of 10)

Pros

  • Easy assembly
  • Appropriate build quality
  • Aluminium frame
  • Beginner friendliness
  • Good print quality
  • Large pressure area
  • Permanent film

Cons

  • Quality control
  • Ill-considered pre-assembly
  • Ill-considered design
Contents

First impression of the Anet E10

When it comes to DIY 3D printer kits, "Anet" is one of the best-known manufacturers. With the Anet A8 and Anet A6 (Anet A6 test report), the manufacturer has already brought two inexpensive printer kits onto the market, which were particularly popular in the community and still offer a good entry into the world of 3D printing. The Anet E10 is another DIY 3D printer where you only receive the parts for assembly. What makes this model so interesting is, on the one hand, the Bowden setup, as well as the aluminium frame.

Frontansicht auf den Anet E10

What’s included

The Anet E10 is delivered as a kit which, unlike the other Anet DIY 3D printers, is largely pre-assembled. For safe transport, all parts are embedded in several polystyrene inserts. The 3 largest components of the kit are the two pre-assembled frame sections and the control unit, which comprises the power supply and the mainboard. Furthermore, the contents of the package include a screw and tool set, 2x 10 meters of PLA filament in white, a permanent adhesive foil and a small spatula. In addition to the printed assembly instructions, a USB stick with configuration files, further manuals, 3D printing software and ready-made print files is also included. What is missing from the delivery is a pair of pliers for loosening the cable ties.

Seitenansicht auf den Anet E10

Assembly of the Anet E10

Thanks to the 3D printer's pre-assembly, setup is completed in around 30 minutes. As a result, the Anet E10 clearly undercuts the setup time of an Anet A6 or A8, although there are some errors in the pre-assembly on the manufacturer's part. In our test unit in particular, the Y-axis timing belt was far from being securely fastened and had to be completely re-tensioned and secured. In addition, Anet pre-mounted the Z-axis stepper motors so that the connected cable will definitely catch on the heated bed when the motors are plugged in. Ultimately, both motors should be rotated so that the connectors face forwards or to the side. Caution is also needed with the screws. Some screws have been tightened so firmly that they can hardly be loosened, while others are merely loose in their holes.

Play video on YouTube
When you play the video, it loads from YouTube; data is transferred to Google in the process.

You can watch the assembly of our test unit in this video.

The entire assembly can be completed in just eight steps. The included assembly manual is illustrated and clearly written. The level of difficulty is kept particularly low for this model, so that assembly can be easily completed even by a beginner 3D printer user. In particular, wiring the Anet E10 is extremely easy. The cables are already connected to the mainboard and the power supply, so you do not need to worry about this part of the wiring. The individual cables for the steppers and switches, as well as the heated bed, are clearly labelled and simply need to be plugged in.

Design and build quality

Aluminium frame

The design of the Anet E10 is primarily based on the previously released and successful Creality CR-10. The frame structure is formed by T-aluminium profiles. A major advantage of the aluminium frame compared to the acrylic frame of the Anet A8 and Anet A6 is its better stability, which simultaneously ensures a more accurate print result, as well as less frame wear. Acrylic in particular is known to break or deform relatively quickly under constant tension and constant vibration. To avoid vibration, the Anet E10 is equipped with a total of 4 rubber feet. Unfortunately, Anet decided to manufacture the rod holders from 3D-printed material. Higher-quality holders would have been desirable here.

Heated bed

The print bed or hotbed of the Anet E10 is moved along the Y-axis by sliding bearings. A belt tensioner is already present, meaning the 3D printer does not need to be modified first. The print volume of the Anet E10 is more compact. At only 220 x 270 x 300 mm, the print area is somewhat more compact than the 300 x 300 x 400 mm print area of the Crealty CR-10. The belt attachment is worthy of criticism. It is held only by two screw heads.

Bowden Extruder

The extruder is of the “Bowden” type. Unlike a “direct extruder”, in a “Bowden extruder” the stepper motor that drives the filament is not mounted on the X-axis but attached separately to the printer. This significantly reduces the weight on the X-axis, relieving it and simultaneously allowing for a considerably higher printing speed. However, the greater distance between the extruder and nozzle brings disadvantages with the Bowden extruder, making printing with soft filaments significantly more difficult, for example. A second Z-axis stepper with screw guide, which is notably missing on the Creality CR-10 for instance, provides (theoretically) more stability. The design of the extruder is criticised. The cooling block sits directly on the carriage, completely missing the point of such a cooling block as the air can hardly circulate. Then there is the huge fan, which blows not only on the cooling block but also on the hot end. Finally, the fan duct is so feeble that it is also barely useful, and a modified fan duct would hardly fit.

Control unit

The motherboard, power supply and display are housed in a separate control unit distinct from the Anet E10. The resulting improved cable management makes the 3D printer look tidier overall and it is easier to track which cable leads where. The graphical display (12864 LCD) is identical to the display of the Anet A6. The printer is operated via a single-button control. A minor improvement compared to previous Anet models is the toggle switch now located on the power supply. A really small but correspondingly loud fan ensures that hot air is blown out of the metal housing.

Build quality

The 3D printer is well built for the price. All components fit together and screwed together precisely. There were specifically no defective parts in our kit. However, regarding the build quality of such DIY 3D printer kits, one should be aware that it is possible to receive a “lemon”. Usually, however, the errors are not serious and are limited to broken screws or sloppy drill holes.

Hardware and print performance

The build volume of the Anet E10 is 220 x 270 x 300 mm. The included nozzle has a diameter of 0.4 mm. The layer height ranges between 0.1 and 0.4 mm. Various filaments can be printed, from typical PLA and ABS to HIPS or wood. According to Anet, the accuracy of the X and Y axes is 0.015 mm, while the Z axis is 0.004 mm. The maximum print speed ranges between 40 and 120 mm/s. The motors used are unspecified NEMA17 stepper motors. For the mainboard, Anet remains consistent and continues to use the Anet V2.0.

Calibrating the Anet E10

Before you can start printing with the Anet E10, the Bowden setup must be completed, as well as the individual axes of the 3D printer must be calibrated and the hot bed levelled. The included printed assembly manual does not cover this. Instead, you should refer to the digital assembly manual, which is located on the included SD memory card. It explains, among other things, how to connect the bowden tube to the extruder and stepper, how to correctly feed in the filament, and how to calibrate the individual axes or the hot bed. We have also roughly summarised the individual steps in the following video.

Play video on YouTube
When you play the video, it loads from YouTube; data is transferred to Google in the process.

Here is a checklist to consider before the first print.

  • Are the cables connected correctly?
  • Are all screws tightened?
  • Are all axes calibrated and the heated bed levelled?
  • Are the straps taut?
  • Can the print bed, carriage and Z-axis move freely?

Print quality

Once the steps above have been completed correctly, nothing stands in the way of a first print. Pre-made GCODE print files are already on the SD card. The manufacturer also includes a slightly older version of Cura with a configuration file, so you can create your own print files without much hassle. However, it is recommended to download the latest Cura version directly from the Ultimaker website (Link).

Druckqualität des Anet E10
The first proper print after several calibration cubes

To print, simply insert the SD memory card into the designated slot on the control centre and select "Init. SD-Card" from the menu, which means "initialise SD memory card". You can then access the memory card's folder structure and start your first print attempt by selecting the desired file. Alternatively, you can send a file to the printer via the motherboard's USB interface to start a print job. All drivers are located on the included SD memory card.

Once a print job has started, the print bed and nozzle are brought to the temperature specified in the GCODE. The preset temperature is usually 50 °C for the heated bed and 200 °C for the nozzle. Trial and error is required here! Different filaments require different temperatures, and even the same type of filament can vary considerably. Many filament manufacturers provide a recommended printing temperature on the packaging. The same applies to the filament supplied with the Anet, which should be printed between 190 °C and 210 °C.

Our first print test was a small "XYZ Calibration Cube", created using the provided Cura configuration file. One advantage of the cube is that it can be printed in a very short time while simultaneously allowing the accuracy of the individual axes to be checked. The heated bed was set to 50°C and the hot end to 200°C by default. The Anet E10 visibly struggled with the temperature of the hot end. The problem is the fan, which blows not only on the heat sink but also directly on the hot end at the same time. To get the 3D printer up to temperature, one should therefore tape up the lower part of the fan.

Anet E10 Erster Druck Druckqualität
First print result with the Anet E10

The print result was quite acceptable, especially for the first attempt, although a visible "warping effect" occurred. After some fine-tuning, without significantly modifying the printer, the Anet E10 achieved print results comparable to a modified Anet A6 and impressed with hardly visible layers. The permanent film also proved to be practical, saving you from using Blu-Tack or masking tape. All previous prints adhered excellently to the permanent film and were extremely easy to remove.

techreviewer TEST VERDICT OKAY 7,7/ 10 2018 Anet E10
Award graphic (SVG)

Our verdict

The crucial question is: Is it worth buying an Anet E10? Well, if you want a 3D printer that doesn't take half a day to assemble and delivers good print results without much modification, it is certainly worth considering the Anet E10 (despite some criticisms). However, if you enjoy tinkering, can live with lower print speeds, and don't mind lacking a stable aluminium frame, you are better off with a significantly cheaper Anet A6 or A8, at least according to current prices.

Specifications

General
Model
Anet E10
Type
FDM printers
Enclosure material
Aluminium
Print speed
40 - 120 mm/s
XY accuracy
0.015 mm
Z-axis accuracy
0.004 mm
Size
40.00 x 44.00 x 49.50 cm
Weight
7.8kg
Nozzle
Type
Single
Diameter
0.4 mm
Temperature
up to 260°C
Layer height
0.1 - 0.4 mm
Print bed
Build plate size
220 x 270 x 300 mm
Heated bed
Yes
Extruder
Type
Bowden
Material
1.75 mm ABS, HIPS, PLA, etc.
Reviewed by

Timo Altmeyer

Timo is the founder of techreviewer.de and a true technology expert. From smartphones to e-bikes, and from home cinema to smart homes, he always has his finger on the pulse of the latest trends.

To author profile →

Comments (17)

  1. I have an A8 myself and by the time it was finished I had spent another €150. I like the aluminium profile and the rubber feet. I only got my A8 stable with a rubber mat for washing machines, which cost me another €20. You really cannot complain for around €250. It might become my second toy :P. However, I will wait for your test and then see what improvements come out in the coming months. There must definitely be a track editor!

    Replies
  2. Yes, I agree with you. I have also invested significantly in my A6 (other shafts, IGUS plain bearings, level sensor, etc.). Ultimately, it is also fun to tinker with the printer and it actually prints quite well even without improvements. I am really looking forward to the E10 and am already looking forward to the review.

    Replies
  3. Cool thing .. at this price I'll probably get that thing as a hobby too. Do you know any good websites where I can get templates?

    Replies
  4. Free templates are best downloaded from thingiverse.com.

    Replies
  5. Is there a MOSFET between the power supply and the mainboard, or does one need to buy it separately as with the other printers?

    Replies
  6. This is not yet known, as nobody has the printer yet. As soon as there is new information, I will update the post.

    Replies
  7. Helmfried A.

    Hi, I have a few questions before buying. I hope you can help me out.
    1. Does the printer come with a glass plate?
    2. How long does assembly take?
    3. Does it have a heated bed?

    Thanks!

    Replies
  8. Hi, I will try to answer your questions, even though we have not yet received our test unit.
    1. A glass pane is not included (see first unboxing videos). However, you can have a pane cut quite cheaply or buy a ready-made borosilicate glass plate on Amazon.
    2. I am also referring to videos by others here. Assembly takes approximately one hour.
    3. Yes, there is a heatbed.

    Replies
  9. Helmfried A.

    Thank you very much for the quick reply. The fact that the printer has a heated bed is the most important thing for me. I will have the glass sheet sent to me as soon as I have the E10!

    Replies
  10. I watched a two-hour review video of this device yesterday. The assembly and calibration are easy even for beginners. What one can debate are the individual components used. The aluminium profiles are not solid X-profiles but merely T-profiles, and the connecting parts are made of ABS. And take a look at the extruder. It fits tightly in the guide. You certainly can’t fit a perfectly circular fan mount on it.

    Replies
  11. Hi, you are right. What could be gleaned from the initial reviews sounds rather disappointing. Especially in comparison with the Creality CR-10, the Anet E10 looks underwhelming. What bothers me most are the printed holders and the extruder, which receives virtually no airflow. I have no idea what Anet were thinking. If the price settles around 200€ – okay – but 250€ is definitely too much for that. I am already looking forward to seeing our review unit...

    Replies
  12. Hello, is a test of the Anet E12 planned? Best regards

    Replies
  13. Andreas Hoffmann

    Obviously not!
    Unbox it, write a superficial review, done!
    I can also nitpick a Ferrari because its trunk is too small!
    If you’re looking for a “perfect” 3D printer, you’ll have to shell out €15,000.
    And why not use 3D-printed axle mounts from Anet?
    They hardly have to withstand any forces!
    And ALL the upgrade parts are available online for free.
    Or is your filament too expensive?
    It’s a DIY printer, not a professional machine.

    Replies
  14. Hi Andreas, it seems to me that you have not understood the purpose of a review. A review is primarily about highlighting the product's points of criticism. I am not a reviewer who conceals such criticism points from his readers. The Anet E10 is simply not perfect. You will find the same or similar points of criticism in other reviews too. To what extent one subsequently improves the 3D printer is up to the individual. It is purely about what the manufacturer presents. And here, Anet could have presented a significantly better product without much effort.

    If you think the review is too “superficial,” you’re of course free to start your own blog and write detailed reviews. If you then spend several weeks taking a closer look at the 3D printer, you might also notice the points I criticized ;). I still use the E10, and I’ve improved it too, but my opinion of the design flaws hasn’t changed.

    Replies
  15. Hi, is a detailed review of the E12 coming?

    Replies
  16. Hi Felix, unfortunately, we were not provided with a test unit of the E12. However, an acquaintance of mine has the E12 in use and is satisfied with it so far. There are no design differences compared to the E10.

    Replies
  17. Hello, I wanted to use the GearBest deal today on 24-06-2018 with the super price of 217.49 EUR.
    Unfortunately, only Warehouse China is currently selectable, which adds shipping costs of around 25 EUR.
    The price of the printer alone was 240 and the coupon is not being accepted.

    Do you have any advice or a current link for me?

    Replies

Write a comment

By submitting, your name, email, and comment will be stored. Find out more in our Privacy Policy. We review comments with multiple links before approving them.

The techreviewer newsletter

The week’s top reviews, news, and deals – delivered straight to your inbox.