Contents
Design, build quality, and included accessories
Design is, as always, a matter of taste. Nevertheless, I will address some characteristics here. The BlitzWolf BW-FYE8 is characterised by its vertically arranged dual drivers, its many curves and the conspicuous piano lacquer finish. The stem protruding visibly from the ear evokes memories of the proven design of the Apple AirPods.
The earbud housings are largely made from a single piece. This means there are practically no gaps where dirt can accumulate. The earbuds are also largely protected against jetted water (IPX5). Each earbud weighs a light 5 grams.
The BW-FYE8 is delivered with an oval charging case. Above the BlitzWolf logo, there are four LED indicators that show the charging status of the earphones (25% per LED). The earphones are magnetically pulled into the charging cradle and hold firmly in place. The same applies to the lid, which also closes magnetically. The charging box along with the earphones weigh 71 grams.
The build quality of the earbuds and the charging case is good. The delivery contents include the BW-FYE8 earbuds, silicone ear tips in sizes S, M and L, the charging case, a microUSB charging cable and a multilingual user manual. Any standard smartphone charger can be used for charging.
Wearing comfort
A good in-ear headphone should sit as discreetly as possible yet securely in the ear. This largely applies to the BlitzWolf BW-FYE8. The sound tube of the in-ear head is angled so that only the silicone tips touch the ear. Even after prolonged wear, there is no uncomfortable pressure in the auricle.
The interchangeable ear tips allow for an excellent fit for the wearer. Those wanting to use the in-ear headphones for sports should still consider swapping the supplied silicone pads for memory foam tips.
Setup
If you open the lid of the charging case, both earbuds attempt to establish a connection with the previously connected playback device. If no connection has been established yet, it automatically switches to pairing mode.
The pairing mode is indicated by a red-blue flashing LED on both in-ear buds. Unlike many other TWS in-ear headphones, where one earbud acts as the 'master' connected to the playback device and the second earbud merely acts as a 'slave' establishing a connection to the 'master', each of the BW-FYE8 earbuds acts as its own Bluetooth device. Accordingly, each earbud must be connected to the playback device separately.
One major advantage of this rather unusual implementation is that you don't necessarily have to use both earbuds. If you want to leave one ear free, the second earbud can simply remain in the charging case. This has no impact on sound quality or latency to the playback device. More on this in the sound quality section.
Sound quality
Each earbud contains two 6 mm dynamic drivers. The frequency range is specified as 20 Hz to 20 kHz. The impedance is 16 ohms, the nominal power 3 mW and the sensitivity 97 dB.
Bass, mids and treble
The BlitzWolf BW-FYE8 is a classic in-ear headphone with a „vanilla“ sound profile. The sound is characterised by strongly emphasised bass and elevated highs. The mids are slightly neglected, which is why vocals audibly recede into the background. This sound profile appeals primarily to mainstream music listeners who prefer an extremely dynamic sound.
Lovers of electronic music are guaranteed to get their money's worth. With well-fitting ear tips, very good external noise isolation is achieved, allowing bass to come into its own. Those who prefer to enjoy their music neutrally and unadulterated should definitely stay away from the BW-FYE8!
Bluetooth
The installed audio processor is a Qualcomm QCCC3020. This is frequently used in inexpensive TWS headphones. Key features of the chip are Bluetooth 5.0, CVC noise reduction and support for the aptX audio codec.
When connected to an aptX compatible playback device, the high-resolution audio codec is selected by default. Compared to AAC, aptX offers a higher bitrate (352 vs. 250 kbps) as well as lower latency. Audible differences between the codecs are hardly noticeable. However, the lower latency has a positive effect on audio-video sync if you use the BW-FYE8 for watching films.
Controls and headset
Multifunction Key
Each of the two earbuds features a so-called “Multifunction Key”. A small part of the earbud housing doubles as a touch panel that responds to various touch patterns. This allows control of music playback, incoming calls and the voice assistant.
In our test, the touch control proved unreliable. Finding the touch point immediately is already difficult. If you hit the point, the input detection responds with significant delay, making the various touch patterns hard to implement.
Microphone
The BlitzWolf BW-FYE8 is equipped with a dual microphone. Calls can be conducted intelligibly. CVC noise reduction also works, but struggles in city traffic with many interfering noises. Strong noise reduction is noticeable through muffled and slightly blurred voice quality.
Battery
According to BlitzWolf, a fully charged battery is sufficient for 5 hours of music playback. Surprisingly, the battery life was significantly higher in the test. It was only after 13 hours of music playback that the BW-FYE8 had to go back into the charging case. The charging case has a 500 mAh battery. This allows the earbuds to be fully charged four times.
There is no fast-charging function, which is available on many high-priced branded models. It takes just under 2 hours to fully charge the earbuds and the charging case each.
Our verdict
The BlitzWolf BW-FYE8 offers consistently comfortable wear, impressive battery life and a well-conceived dual-channel connection mode. The in-ear headphones show weaknesses in the “Multifunction Key” controls. The capacitive control panel does not always work first time.
The sound tuning is of the 'V-shaped' character type. In particular, lovers of electronic music will get their money's worth. Bass and treble are emphasised, while the mids are slightly neglected. If you like this sound profile and want to stay under €50, you should definitely take a look at the BW-FYE8.
Specifications
General
- Drivers
- Dynamic driver
- Size
- 2x6 mm
- DSP
- QCC3020
- Frequency range
- 20 Hz - 20 kHz
- Impedance
- 16 ohms
- Sensitivity
- 97 dB
Bluetooth
- Standard
- 5.0 BLE
- Range
- up to 10 meters
- Profiles
- *HSP
- *HFP
- *A2DP
- *AVRCP
- Codec
- *SBC
- *AAC
- *aptX
Other
- Microphone
- Yes (CVC)
- Operation
- Touch
- Battery
- 5-14 hours
- Size
- 44.3 x 29.7 x 15.5 mm
- Weight
- 5g per earbud
What’s included
1x BlitzWolf BW-FYE8 6x ear tips (S/M/L) 1x charging case 1x MicroUSB charging cable 1x user manual











Comments