Contents
BLUETTI Elite 100 V2: unboxing, design and ports
What’s included
The BLUETTI Elite 100 V2 arrives securely packaged. The box contains:
- the BLUETTI Elite 100 V2 power station
- a kettle lead for mains operation
- a solar charging cable with MC4 to XT60 connectors
- and an instruction manual
Anyone who wants to charge it in the car will need to purchase the car charging cable separately. While this is not unusual in this device class, it should be factored in before purchase.

Design and build quality
With a weight of 11.5 kilograms and compact dimensions of 320 × 215 × 250 millimetres, the Elite 100 V2 is much easier to handle than its specifications might suggest. It fits easily in the boot and is still manageable to carry on your own, although it is clearly no lightweight.
The casing is made of robust plastic and is well finished. The gaps are even, and nothing creaks or gives way under pressure. BLUETTI has opted for a functional design without many frills. However, the casing is not weatherproof, so you should still choose a sheltered location when using it outdoors.
The carrying handle is located on top and is built in. Because of its position, the weight is not perfectly balanced when carrying it, but remains easy to control overall.

Ports and display
All the relevant ports are clearly separated and easy to reach on the front. In theory, up to 9 devices can be operated simultaneously. They include:
AC outputs
- 2x AC outlets with up to 1,800 watts of continuous output and Power Lifting Mode for peak loads up to 2,700 watts

DC outputs
- 1x car socket with 12 V and 10 A
- 2x DC5521 with 12 V and up to 5 A per connection
USB outputs
- 2x USB-A with 5 V and 3 A
- 1x USB-C at up to 100 watts
- 1x USB-C up to 140 watts, including a 28-volt profile

The AC and DC outputs can each be activated separately using their own buttons. They also light up clearly when the respective section is switched on.
For monitoring, there is also a clearly legible display integrated into the front, showing current charging and discharging power, remaining runtime, and battery level as a percentage. The estimate adjusts dynamically to the connected devices and proved realistic in testing.

BLUETTI Elite 100 V2: technology and capacity
Inside the Elite 100 V2 is a LiFePO4 battery system with a rated capacity of 1024 Wh. BLUETTI uses a system voltage of 51.2 volts at 20 Ah, resulting in lower losses and more efficient power delivery, particularly under heavier loads.
The installed battery is rated for over 4,000 charge cycles before retaining 80 percent of its capacity. With regular use, that corresponds to an approximate lifespan of well over ten years—far longer than conventional NMC batteries, which often show noticeable degradation after 800 to 1,000 cycles.
A BMS (battery management system) monitors voltage, temperature, and current flow, and intervenes as soon as limits are exceeded. This is complemented by an MPPT controller for the solar input, which optimizes the output of connected solar panels.
BLUETTI Elite 100 V2: hands-on test
Performance
In performance tests, the Elite 100 V2 proves capable, supplying around 80% of household appliances without issue at 1,800 W of continuous output. It powered a conventional automatic coffee machine, which demands peaks of around 1,500 W during its heating phase, without interruption during testing.
Even more demanding devices, such as a hair dryer on its highest setting, don't faze the power station. If needed, the Power Lifting Mode can be enabled via the BLUETTI app. It lowers the output voltage in a controlled manner, allowing resistive loads—that is, devices that primarily generate heat or light—to run reliably at up to 2,700 watts.

In a test with a kettle, this worked reliably, although the water then seemed to take a tiny bit longer to heat up. However, this mode is not suitable for sensitive electronics because of the reduced output voltage.
The Elite 100 V2 makes a very positive impression in the USB department. A power-hungry MacBook Pro can be charged at full speed via the 140 W USB-C port, which is not necessarily standard in this device class. The Elite 100 V2 also handles moderate loads, such as a complete desktop PC setup (mini PC) including monitor and peripherals (approx. 130 W), without difficulty.
UPS and bypass mode
For home-office use or as protection for critical hardware, there is a UPS function. In the test setup, the Elite 100 V2 was connected between the wall socket and a NAS. During a simulated power cut (by pulling the plug), the power station switched over in under 10 ms. The server kept running without restarting or losing its connection. To protect the cells, there is a bypass mode that routes power directly to the end device.

Noise levels
Acoustically, the Elite 100 V2 is very discreet at output levels up to around 500 W. The fans usually remain off or spin at a barely perceptible speed. They only become clearly audible under full load or during fast charging. The fan noise is more of a low, muted hum and is less intrusive than the high-pitched whine of many other models.
Charging
Thanks to its internal power supply, charging is straightforward using a standard appliance power cord. The station reaches a charging power of up to 1,200 W from a wall outlet. This brings it to 80 percent capacity in around 45 minutes, while a full charge takes about 70 minutes.

For off-grid use, the DC input offers solar charging power of up to 1,000 W (12–60 V, 20 A), enabling similarly short charging times to mains power in optimal weather conditions. It also supports pass-through charging, meaning the power station can charge and discharge at the same time.
Efficiency
The power station also makes a solid impression in the capacity test. With a constant load of 500 watts, we were able to draw 946 Wh. Compared with the rated capacity of 1024 Wh, this corresponds to usable energy of around 93 per cent, indicating an above-average efficiency for the internal inverter.
At very low loads in the double-digit range, however, relative self-consumption increases, reducing usable capacity to about 80 percent.
BLUETTI app
The BLUETTI app can connect via Bluetooth or Wi-Fi. The latter enables the power station to be monitored and controlled over longer distances. Features such as activating Power Lifting or ECO mode, adjusting the charging speed, or setting PV priority can all be conveniently managed remotely.
Our verdict
With the Elite 100 V2, BLUETTI has delivered an impressive upgrade. It's faster, more efficient, and smarter than many of its predecessors and direct competitors. Anyone looking for a power station that delivers 1,800 watts, charges fully in around 70 minutes, and will last the next ten years thanks to LiFePO4 will be hard-pressed to find a better choice. The market price of around 650 euros is absolutely justified given the technology on offer and the high efficiency of 93%. A powerful piece of hardware with only minor weaknesses in the details (accessories and weather resistance).
Specifications
Battery
- Capacity
- 1,024 Wh (51.2 V, 20 Ah)
- Type
- LiFePO₄ (lithium iron phosphate)
- Life cycles
- 4,000+ cycles to 80% of original capacity
- Management system
- BMS, MPPT control, safety mechanisms
Output
- Power Lifting Mode
- 2.700 W
- Peak power
- 3.600 W
- AC + DC output (total)
- 1,900 W max.
- AC output
- 1,800 W max., 230 V AC, 7.8 A
- Total outlets
- 9 ports
- – 2× AC outlets
- – 7× DC outputs
- DC outputs
- – 1× 12 V/10 A cigarette lighter socket
- – 2× DC5521 12 V/5 A per port, 8 A max. total
- USB outputs
- – 2× USB-A 5 V/3 A, 15 W max. per port
- – 1× USB-C 100 W
- 5 V/3 A, 9 V/3 A, 12 V/3 A, 15 V/3 A, 20 V/5 A
- – 1× USB-C 140 W
- 5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/5 A, 28 V/5 A
Input
- AC input
- 2,300 W max. (charging + bypass), 230 V AC
- DC input
- 1,000 W max., 12–60 V, 20 A max.
- AC charging power
- 1,200 W max.
- AC + DC charging
- 1,200 W max.
- Charging options
- AC / solar (PV) / car / generator / AC + PV
Charging times
- AC charging
- – approx. 45 minutes to 80%
- – approx. 70 minutes to 100%
- Solar charging
- – approx. 70 minutes to 100%
- (under optimal conditions)
General
- App control
- Wi-Fi & Bluetooth
- Pass-through charging
- Yes
- UPS function
- Yes
- Switching time ≤ 10 ms
- Weight
- 11.5 kg (25 lbs)
- Dimensions (L × W × D)
- 320 × 215 × 250 mm
- (12.6 × 8.5 × 9.8 inches)
- Operating temperature
- 0–40 °C
- Discharge temperature
- -20–40 °C
- Warranty
- 5 years
What’s included
1x BLUETTI Elite 100 V2 1x AC power cable 1x PV charging cable 1x manual
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 479,00 € | Go to store |
| BLUETTI | 479,00 € | Go to store |





Comments