Contents
Design, build quality, and included accessories
Visually, the DEEBOT X12 OmniCyclone is clearly based on its predecessor’s design, but its darker colour scheme gives it a slightly more modern, premium look. The robot’s front features the two new FocusJet nozzles, which are designed to pre-treat stubborn dirt with water and cleaning solution before the actual mopping process.
ECOVACS has placed the navigation and obstacle-detection sensors directly beside it, allowing the device to do without the classic LiDAR tower on top. At 9.8 centimeters tall, it remains comparatively slim, which is particularly useful when cleaning under low furniture.

ECOVACS continues to use the OZMO Roller, but has given the mop roller in version 3 a much larger form factor than its predecessor. At around 27 centimeters wide, the roller covers most of the device's width and can also extend sideways to get closer to walls and furniture edges. A side-mounted felt strip also protects sensitive surfaces from scratches.

The new ZeroTangle 4.0 main brush handles dirt pick-up. The redesigned brush is intended to move hair and pet hair to the suction channel more efficiently and reduce tangling. The system is supported by a single side brush that directs dirt towards the main brush. ECOVACS has also upgraded the chassis. The integrated all-wheel drive is designed to help the robot cross door thresholds, carpet edges and other obstacles up to 2.4 centimetres high, and double thresholds up to 4 centimetres.

As with previous models, the X12's OmniCyclone station is comparatively large. Measuring 38 × 49.3 cm at the base and standing 46.5 cm tall, it houses the fresh- and wastewater tanks, automatic dust emptying, and the cleaning and drying systems for the mop roller. It also dispenses cleaning solution automatically.
Instead of collecting the dirt in a disposable bag, it ends up in a bagless collection bin. This avoids additional waste, but emptying it means having a little more contact with the dirt collected. There is no model with a water connection instead of a water tank here, by the way.

Overall, the build quality makes a very good impression. The gaps are even, moving components fit neatly into their guides, and the station also feels solidly constructed.
The contents of the DEEBOT X12 OmniCyclone package are fairly limited. In addition to the robot vacuum and mop itself, the package includes the OmniCyclone station, power cable and user manual, as well as two different cleaning solutions. One solution is intended for regular floor cleaning, while the other is designed for stubborn dirt.

Setup and initial mapping
Setup is carried out via the ECOVACS HOME app, available for Android and iOS from the respective app stores. After scanning the QR code under the device cover, the app guides you through the pairing process step by step. There is only one limitation when it comes to Wi-Fi. The DEEBOT supports only 2.4 GHz networks and combined 2.4/5 GHz networks. Connecting to a 5 GHz-only Wi-Fi network is still not possible.

Before the X12 OmniCyclone starts its first cleaning jobs, it first creates a map of the home. In testing, it identified the room layout with surprising accuracy, better than many competing models. Carpets are the only exception: they are not detected immediately, but are automatically added to the map after several cleaning runs. Mapping itself took just a few minutes. Rooms can then be split or merged, no-go zones defined, and cleaning and carpet areas adjusted individually.

ECOVACS HOME app features
Overall, the ECOVACS HOME app is clear and easy to use. Cleaning modes, suction levels, mopping intensity, schedules, and map management are logically organized and easy to find even for first-time users.
The cleaning modes include the classic options of vacuuming, vacuuming and mopping, or mopping after vacuuming. You can also adjust suction power, water flow, cleaning speed and the number of passes. The range of available settings is extensive overall, but does not quite match the feature set of current top models from Roborock or Dreame. In particular, custom room profiles with different cleaning parameters can only be configured to a limited extent.
With AI Agent, ECOVACS introduces a new AI feature designed to automate cleaning tasks and allow users to control them via chat or voice. However, the feature did not seem fully developed in our test. In the chat interface, "YIKO-GPT", as ECOVACS calls the assistant, often replied that the robot was offline, even though it was connected. In other cases, it simply failed to understand the input. Voice control was even more problematic. German voice commands were incorrectly transcribed as English text and therefore could not be processed. In the more conventional way, without these issues, the X12 also supports integration with Alexa, Google Assistant, Siri, and Matter-compatible smart home systems.
Alongside its cleaning functions, the X12 OmniCyclone offers some useful extras. The pet mode, for example, takes typical pet areas such as feeding stations into account when cleaning and is designed to actively avoid pets. It also features a child lock and a remote access function via the integrated camera. This lets you use the robot as a mobile security camera when needed and control it around your home using the app. The image quality is sufficient for checking in or keeping an eye on pets, but does not match that of a security camera. A small LED light is available for driving in the dark, although its illumination is limited to short distances.
Navigation and obstacle detection
For navigation, the DEEBOT X12 OmniCyclone uses ECOVACS AIVI 3D 4.0 technology, with various distance sensors, an RGB camera and integrated laser navigation. The X12 OmniCyclone follows a fairly systematic approach when cleaning. It first travels around the edges of the room before cleaning the remaining area in even passes.
Its rather dynamic driving style is striking. The robot moves quickly around the home, but sometimes accelerates and brakes very abruptly. It occasionally stops for a moment to analyse its surroundings, then continues on its way. This behaviour is particularly noticeable in areas with lots of furniture or obstacles.
Overall, the X12 OmniCyclone delivers decent, though not perfect, obstacle detection. In our test, it usually recognized and avoided typical everyday objects such as socks, clothing, and charging cables left lying around. However, the X12 OmniCyclone occasionally tends to overestimate its abilities.
It repeatedly underestimated its own height and tried to enter areas that were actually too low. For example, it squeezed under a toilet bowl and scratched the plastic lid in the process. In such cases, the only solution is to set up a no-go zone in the app.

Even around solid obstacles, the robot does not always act with particular finesse. It detects chair legs, flower pots, skirting boards and similar objects, but the X12 OmniCyclone often also relies on its bumper and only adjusts its route after light contact. This rarely causes serious problems, but seems somewhat outdated at this price. Depending on the furnishings, lighter objects may end up being moved.
Carpet detection is more impressive. Carpets are reliably detected and automatically added to the map, and the robot also handles subsequent changes correctly. If a carpet is removed or moved elsewhere, the robot updates the map accordingly instead of permanently treating the area as a carpet zone.
Cleaning in a practical test
Everyday suction power
Overall cleaning performance is good, but it does not stand out from the competition—or even its predecessor—as much as the specifications (22,000 pascals) might suggest.
On hard floors, the X12 OmniCyclone cleans thoroughly and reliably picks up typical dirt such as dust, fluff and crumbs. However, during testing we occasionally observed that balls of fluff were lost again when the robot crossed door thresholds or carpet edges. This did not happen every time it cleaned, but it occurred often enough to be noticeable.

When the X12 OmniCyclone detects a carpet, it pauses briefly, moves the cover in front of the mopping roller and automatically increases suction power. It reliably picks up hair and surface dirt. However, it does not quite match the performance of the strongest current models when it comes to deeply embedded dirt. Hair has rarely become tangled in the new ZeroTangle 4.0 main brush, by the way.
Mopping performance is its greatest strength
The X12 OmniCyclone's real strength is mopping. Its predecessor was already among the best models on the market in this regard, and the X12 OmniCyclone also delivers a strong performance.
The roller mop is moistened evenly across its entire width and leaves no dry patches, visible streaks or puddles on the floor. On tiles, vinyl and laminate, the X12 OmniCyclone removed even dried coffee stains, footprints, dust films and typical kitchen dirt in most cases after two or three passes.

However, larger quantities of liquid or highly concentrated dirt also push the X12 OmniCyclone beyond the limits of current mopping robots. For example, if spilled drinks or other wet messes get on the floor, the wheels, side brush and other components may come into contact with them before the roller mop has fully cleaned the area.
As a result, it is not always possible to prevent dirt from being spread unintentionally. This is not a problem specific to the ECOVACS model, however; it also affects many devices with rotating mops.
The edge cleaning is also impressive. The roller itself gets very close to edges, and the side felt guard picks up additional dust and fine dirt along skirting boards. However, this strip of felt gets dirty quickly and should be checked or cleaned regularly.

FocusJet in everyday use
New to the X12 OmniCyclone is the so-called FocusJet. When the robot detects heavier soiling, it first sprays the affected area with water and cleaning solution before the mopping roller passes over it. This is intended to help loosen dried-on stains in particular.
In principle, this works. During testing, conspicuous stains such as ketchup on light-colored tiles were reliably detected and then removed. However, the detection rate depends heavily on the contrast between the stain and the flooring. While red stains on light surfaces posed little difficulty, the system struggled much more with dark liquids on dark floors. For example, it did not reliably detect coffee on gray vinyl.
Overall, detection worked less reliably than expected in our test. Many stains were driven over without the FocusJet function being activated at all. As a result, pre-treatment was used much less often than the feature would suggest. The cleaning solution sprayed onto stains also has hardly any time to work. Usually, only a few seconds pass between spraying and the mop roller going over the area.
When FocusJet is activated, another drawback becomes apparent. The robot sprays a relatively generous amount of water and cleaning solution onto the floor in front of it. This regularly causes splashes on the front of the device. After several cleaning runs, this left visible residue in our test. Especially when using hard water, unsightly limescale marks and deposits can build up over time and need to be removed regularly.

However, you should also take a realistic view of the feature. Freshly spilled liquids are not among the typical messes you would leave to a robot vacuum. In such situations, you would usually reach for a cloth straight away, before the robot spreads the liquid over a larger area with its mop roller.
Speed and battery
Taking an average of 84 minutes to clean our 75-square-metre test flat, the X12 OmniCyclone is not exceptionally fast. The time required is in the mid-range for current premium robot vacuums and is reasonable given its thorough mopping performance.
The 4,000 mAh battery provides enough reserve to clean medium-sized flats completely, even with the mopping function enabled, without recharging in between.
OmniCyclone station and maintenance
After cleaning, the robot's dustbin is emptied automatically. The vacuuming is powerful enough to transfer dust, hair, and larger debris into the station's collection bin. As expected, the emptying process itself is fairly loud.
The biggest difference compared with traditional emptying stations becomes apparent when it comes to maintenance. While a dust bag often needs replacing only every few weeks or months, the bagless system requires a little more attention. The collection bin needs to be emptied regularly and occasionally cleared of fine dust. Inevitably, this brings you into greater contact with the collected dirt than a sealed bag solution does. A traditional dust bag therefore remains the more convenient option for allergy sufferers.

In households with pets, dust bags can fill up much faster due to large amounts of hair and need to be replaced accordingly often. This results in ongoing costs, which are entirely eliminated with the bagless system. In the long run, this is cheaper and more sustainable, though not quite as clean to handle as a conventional bag-based station.

The mop roller is also cleaned fully automatically. After each mopping session, it is thoroughly rinsed and then dried with warm air. No unpleasant odours occurred during testing. However, as with all mopping robots, dirt gradually accumulates in the station’s cleaning tray. It can be removed in just a few simple steps and is easy to clean.

Overall, maintenance is fairly limited. Besides refilling the fresh water tank and emptying the dirty water container, regular tasks are mainly limited to cleaning the felt strip on the roller and occasionally emptying the cyclone container.
Our verdict
With the DEEBOT X12 OmniCyclone, ECOVACS delivers one of the best mopping robots currently on the market. The OZMO Roller mop roller delivers excellent results on hard floors, edge cleaning is impressive, and the bagless OmniCyclone system is a welcome departure from the sea of conventional self-emptying stations. Going without dust bags can pay off in the long run, especially for households with pets.
The biggest weakness, however, remains the software. While the ECOVACS HOME app offers all the key functions and is generally reliable in everyday use, it still falls short when it comes to convenience and depth of features. Custom cleaning profiles are relatively limited, and new features such as AI Agent and YIKO-GPT did not feel fully developed in our tests. When voice commands are transcribed incorrectly or the assistant reports that the robot is offline despite an active connection, it feels more like a beta test than a flagship feature.
Specifications
Robot vacuums
- Height
- 9.8 cm
- Mop lift
- Yes (15 mm)
- Mop extension
- Yes (side-extending OZMO roller brush)
- Threshold clearance
- up to 2.4 cm (double thresholds up to 4 cm)
- Suction power
- 22,000 Pa
- Main brush
- ZeroTangle 4.0 anti-tangle brush
- Side brush
- 1× side brush
- Mopping system
- OZMO Roller 3.0
- Roller width
- 27 cm
- FocusJet stain detection
- Yes
- Carpet detection
- Yes (ultrasound)
- Automatic suction adjustment
- Yes
- Dustbin (robot)
- 250 ml
- Fresh water tank (robot)
- 110 ml
Station
- Station
- OmniCyclone multifunction station
- Dust collection
- Bagless cyclone system
- Dust bag
- No
- Fresh water tank
- 3,5 L
- Dirty water tank
- 2,7 L
- Mop cleaning
- Hot-water cleaning
- Mop drying
- Hot air (63 °C)
- Drying time
- 2 / 3 / 4 hours
- Automatic detergent dispensing
- Yes
- Automatic water refill for the robot
- Yes
- Low-water warning
- Yes
Navigation & obstacle detection
- Navigation system
- dToF laser navigation
- Obstacle detection
- AIVI 3D 4.0 with RGB camera
- Mapping
- Multi-floor mapping
- Room layout & zone cleaning
- Yes
- Carpet detection
- Ultrasound
Connectivity & controls
- App
- ECOVACS HOME (Android & iOS)
- Voice control
- YIKO AI Assistant
- Smart home support
- Alexa, Google Assistant, Siri
- Matter protocol
- Yes
- Remote monitoring
- Yes (integrated camera)
- Pet mode
- Yes
- Child lock
- Yes
Battery & runtime
- Capacity
- 4,000 mAh
- Charging time
- approx. 2 hours 25 minutes
- Automatic reloading
- Yes
- Resume cleaning after charging
- Yes
- Noise level
- 64.4 dB(A)
- Performance
- 110 W
Size & weight
- Robot
- 35.3 × 35.1 × 9.8 cm
- Station
- 38.0 × 49.3 × 46.5 cm
- Nominal voltage
- 17,8 V
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 599,00 € | Go to store |
| MediaMarkt | 599,00 € | Go to store |




















Comments