Contents
ILIFE V7S Plus
The robot vacuum brand "ILIFE", which originally emerged from the Chinese electronics manufacturer "Chuwi", now comprises a broad range of cleaning aids that are also very popular in Germany. In addition to low-budget models (e.g. Chuwi ILIFE V5), the manufacturer also offers numerous mid-range models under the designation ILIFE V7 or V7S. The ILIFE V7S Plus is already the third model in the V7S series. Currently, the robot vacuum is still in pre-sale. We have already taken a look at the datasheet.
Vacuuming and Mopping
Dust and water tank in one!
The robot vacuum is visually based on previous models. The circular plastic housing with a rose-gold finish has a diameter of 34 cm, is 8.4 cm high and weighs 3 kg. New is the combination of the dust container and water tank. Instead of two separate containers, you get only one container with a capacity of 0.36 litres. This container is divided into a 0.3-litre water chamber and a 0.06-litre dust chamber. The manufacturer promises higher efficiency as a result, as it is no longer necessary to switch between the two containers depending on the application.

Compared to the ILIFE V7S Pro, however, it would still be a significant "downgrade". The latter does offer two separate containers, but these have a significantly higher capacity of 0.5 and 0.4 litres respectively, despite the same size. A dust chamber with a dust capacity of only 0.06 litres would likely need to be emptied several times during a single cleaning run. That is hardly efficient! There are good prospects regarding the accessory compatibility of V7S models with each other. The V7S and V7S Pro models already showed that the containers are interchangeable. It is quite possible that the previous model's dust container, which is sold separately, can also be used in the V7S Plus.
I-dropping technology
"i-dropping technology". As soon as the robot vacuum moves, water is dispensed drop-by-drop onto the microfibre cloth. When the robot vacuum stops, the water supply is cut off. This allows for a more even and longer-lasting water distribution or supply. For easy cleaning, the mop cloth and holder are removable.

Suction power and modes
The suction power of the ILIFE V7S Pro is 400 Pa. The noise level reaches a staggering 68 dB. A side-mounted brush transports dirt to the central main brush, which is also capable of handling hair thanks to additional rubber flaps. Included are the 4 classic suction profiles "Auto", "Spot", "Edge" and "Schedule". In contrast to older ILIFE models, cleaning in Auto mode is no longer random. An implemented Artificial Intelligence (AI) ensures fully automatic and systematic room cleaning. In Spot mode, the robot vacuum works its way forward in circular movements. In Edge mode, the robot vacuum orients itself along the room boundaries. The Schedule mode is a cleaning mode based on an individually configurable timetable.
The robot vacuum handles gradients of up to 15°. The manufacturer does not specify the maximum height of carpet edges that can be crossed. Once the cleaning process is complete, the robot vacuum automatically returns to the charging station (Return-To-Home).
Crash and collision protection
To prevent collisions and falls down stairs, the vacuum robot is equipped with a total of 11 sensors. Sensors mounted on the front ensure that the ILIFE V7S Plus changes direction before a collision occurs. If a collision cannot be avoided, an additional "bumper" provides obstacle detection. Sensors mounted on the underside prevent driving over stair edges or other drop-offs. This allows the vacuum robot to be used without problems even in areas with staircase access. The sensing technology is infrared-based. There is no laser or camera-based room mapping.

Battery and battery life
The fitted lithium-ion battery has a capacity of 2600 mAh. One charge lasts for approximately 120 minutes. The manufacturer states a charging time of 5 hours. Once the battery level is low, the robot vacuum automatically returns to the charging station (Return-To-Home).
ILIFE V7S Plus vs. ILIFE V7S Pro

Initial Assessment
To describe the ILIFE V7S Plus as an upgrade to the recently released ILIFE V7S Pro would probably be misleading. Rather, ILIFE is making a new attempt with the Plus model, placing the focus on the robot’s (wet) mopping function. Thanks to the i-dropping technology and the combination of dust and water tanks, some quite interesting approaches are comprehensible. A critical eye should be cast on the lower suction power, the relatively high noise level at the same time and the small capacity of the dust bin.
The robot vacuum is available for pre-order until the end of April. The pre-order price is just under €170. As soon as we receive a review sample of the ILIFE V7S Plus, this preview will naturally be followed by a detailed test report.
Specifications
Suction parameters
- Brushes
- 1 side brush
- Suction power
- 400 Pa
- Performance
- 22 watts
- Noise levels
- 68 dB
- Container
- 0.3 litres
- Filter
- HEPA
Functions
- Vacuum function
- Yes
- Wiping function
- Yes
- Remote control
- Yes
- Return function
- Yes
- Cleaning modes
- Auto, point, edges and schedule
Battery
- Type
- Lithium-ion
- Capacity
- 2,600mAh
- Charging time
- 200 - 350 minutes
- Runtime
- 110 - 120 minutes
Other
- Sensors
- Infrared, OBS
- Size
- 34.00 x 34.00 x 8.40 cm
- Weight
- 3000g





Comments