Contents
Review: Roidmi EVE Plus
Robot vacuums with self-emptying stations are trending. It feels like every higher-priced robot vacuum features this comfortable function, which saves you from manually emptying the dustbin. As is often the case, there are significant differences. Some manufacturers include the self-emptying station in the robot vacuum’s box, while others require the station to be purchased separately.
Roidmi has pleasingly decided to offer the robot vacuum with suction station in a bundle. For less than 400 Euro, this is a real statement!
Design, build quality, and included accessories
Design is always a matter of taste, so we will only address the essentials here. Typically round, 35 x 35 x 9.8 cm in size and weighing 3.6 kg – these are the basic characteristics of the Roidmi EVE Plus. At the top centre, we have the laser tower, as the robot vacuum cleaner is one of the models with a LiDAR sensor, which scans the room in three dimensions for precise mapping and obstacle detection.
On the top side, there are finally three control buttons. The middle button starts the cleaning process. The button to its left starts the spot cleaning (limited cleaning area). To the right is the button that sends the vacuum robot back to the suction station, which also acts as a charging station.
There is no flap for opening the top. The 2-in-1 dust-water container is inserted into the rear of the vacuum robot. In the direction of travel, several infrared sensors are located at the front and on the sides, which, in addition to the laser tower, serve for obstacle detection. Collisions are detected using a “bumper” (contact sensor).
The charging contacts of the Roidmi EVE Plus are also interesting. Two are located on the side of the rear, and two more on the underside. The suction station charges via the rear contacts. As noted above, the robot vacuum is also available without a suction station and with a conventional charging dock instead. This charges the robot vacuum via the underside.
We remain on the underside. Instead of just one side brush, the Roidmi EVE Plus is equipped with two side brushes. This allows dirt to be removed from corners even better. Otherwise, we have four additional infrared sensors that prevent the robot vacuum from driving over stair drops, suspended drive wheels, a caster wheel and the main brush, which can be removed to untangle wrapped hairs.
The delivery contents include the robot vacuum, the suction station with four dust bags, a mopping attachment with a microfibre cloth, ten disposable mop pads, a power cable and an instruction manual. In terms of build quality, the Roidmi EVE Plus is on par with other models in its price bracket.
Setup, app and features
During setup, you first choose between the Xiaomi Home app and the Roidmi app. In testing, it was not quite that simple, as the Roidmi app simply refused to find the robot vacuum. Looking at comments on the Roidmi app, this was not an isolated incident. Other users also report experiencing the same problem.
So the "choice" fell on the Xiaomi Home App, through which all products from the Xiaomi ecosystem that have app connectivity can be registered and managed. This is also practical, because if you have other Xiaomi ecosystem products, you only need this one app.
Quick setup
Setup via the Xiaomi Home App is quick and easy. First, the vacuum robot must be put into connection mode. To do this, simply hold down the power button and the return button. In English (with a Chinese accent), you are informed that the vacuum robot can now be paired.
Next, you go through the connection process, which is simply explained. You connect to the vacuum robot's Wi-Fi and enter your own Wi-Fi credentials in the app, which are then transmitted to the vacuum robot. It then connects to the home network. It is essential to note that only 2.5 GHz networks are supported here. The vacuum robot cannot be integrated into a 5 GHz network.
User interface and features
After a successful connection, you have the option of naming the robot vacuum arbitrarily and sharing access with family members. Subsequently, you are greeted by a (still) empty start screen, as a map view is only provided after the first cleaning run.
The user interface itself is clearly laid out and doesn't essentially differ from other vacuum robot apps. The following functions are available:
- Room layout: We can individually define cleaning areas here. The options include selective room cleaning, zone cleaning, whole-room cleaning, and spot cleaning.
- No-Go and No-Mop zones: Areas and rooms that the robot vacuum should not enter can be excluded from cleaning using the 'Virtual Wall', the 'Forbidden Zone' and the 'Mop Forbidden Zone'.
- Multi-mapping: If you want to cover multiple floors without the robot vacuum needing to recreate the room map, up to two maps can be stored.
- Cleaning sequence and timer: Via the “Sequence” function, you can influence the cleaning route, i.e., which room/area the vacuum robot tackles one after the other. A scheduled cleaning via timer can be set using the app.
Information about the current cleaning process includes the battery level, the cleaning time and the cleaning area in m². The cleaning process can be conveniently started and paused via the app. In addition, we can send the robot vacuum back to the docking station at any time and start emptying at the press of a button.
Within the settings, we define the radar priority. This determines whether the robot vacuum uses the LiDAR tower or the pressure sensor as its primary detection sensor. Further configuration options include the button lighting, carpet detection, the emptying cycle at the docking station, voice and volume, cleaning history and the Do Not Disturb mode.
In remote control mode, the app switches to a virtual D-pad, which allows the direction of travel of the robot vacuum to be controlled manually. A wear indicator for the filter, brush and sensors provides information on when they should be replaced or cleaned.
Practical test
That is enough about the app. Let us see how the Roidmi EVE Plus performs in practice.
Suction power
With a maximum suction power of 2700 Pa, the Roidmi EVE Plus places itself somewhere in the middle range on this point. The Dreame Bot Z10 Pro, tested most recently, boasts a maximum suction power of 4000 Pa. The lower suction power on the datasheet is not a major issue, however, because the cleaning result is good.
In testing, the Roidmi robot vacuum coped well with ordinary household dirt. Dust and fine particles are picked up without problems on the standard suction level. There are four suction levels, which are divided into "Quiet", "Standard", "Power" and "Max". The volume varies depending on the suction level, between approx. 45 and 75 dB.
The robot vacuum can move over carpet edges and steps of up to 2 cm in height. A carpet boost, which increases suction power by one level on carpets, is available. Unfortunately, the feature did not work as well as hoped during the test. The robot vacuum sometimes switched to boost mode with a delay and only halfway across.
Sucked-in dirt eventually ends up in the hybrid dust chamber, which is divided into a 300 ml dust bin and a 250 ml water tank.
Navigation
To navigate around the room, Roidmi relies on proven laser navigation. The laser distance sensor located in the "laser tower" scans the surroundings with high precision and creates an accurate room map using the collected spatial data.
During the first cleaning run, the vacuum robot initially needs to orient itself. This process took 66 minutes for a 53 m² area. After the vacuum robot became familiar with the area, subsequent cleaning cycles took only 59 minutes. These are good values, as vacuum robots from other brands and even in higher price brackets usually take longer, without the cleaning result being noticeably better.
The map accuracy proved good in the test. Depending on how you set the radar priority, the vacuum robot moves more or less cautiously around the room. If the priority is on the laser distance sensor, the Roidmi EVE Plus approaches objects and obstacles particularly slowly. Contacts barely occur. If the radar priority is switched off, the vacuum robot probes towards obstacles solely via the bumper ("buffer"). Lightly movable objects are then pushed aside indiscriminately. However, even the laser distance sensor does not detect particularly small objects such as cables, socks or shoes.
Wiping function
In addition to vacuuming, the Roidmi EVE Plus is also capable of wiping the floor wet. To do this, the water tank of the hybrid container is filled with water. A built-in pump regulates the water dispensing volume in four stages. Now simply attach the mopping pad to the container, and the robot vacuum becomes a rudimentary robot mop. The emphasis is on rudimentary, as the main function remains vacuuming.
The robot vacuum drags the microfibre cleaning cloth behind it without applying pressure. Precisely for this reason, the function is much more of a nice-to-have than a replacement for mopping with a mop.
Emptying station
The emptying station of the Roidmi EVE Plus features a modern design, is well-made and is comparatively compact at 35.8 x 35 x 17.5 cm. On the front there is a display that lets us monitor the emptying process and the charging status of the robot vacuum.
During suction, dirt in the dust container is vacuumed out of the docking station via the underside. The extracted dirt collects in a dust bag that is constructed similarly to a vacuum cleaner bag. Fine dirt particles cannot pass through the filter into the surrounding air. The bag should be disposed of in the bin approximately every month.
In the test, the emptying process worked very well. The dirt chamber was always completely emptied. The volume is comparable to that of an industrial vacuum cleaner. However, this is not a major issue, as the suction process lasts only approx. 12 seconds. According to Roidmi, an ionizer is also integrated into the station. It is designed to prevent odours and bind fine dust particles.
Battery
It features a 5,200 mAh lithium-ion battery. A charge corresponds to a runtime of approx. 200 minutes or a cleaning area of 170 m² on the “Standard” suction level. Approximately 250 minutes of runtime are possible on the lowest suction level.
If the battery runs out during the cleaning process, the robot vacuum automatically returns automatically to the station for charging. Afterwards, the Roidmi EVE Plus continues where it left off. The charging time is approx. 4 hours.
Our verdict
The Roidmi EVE Plus is a top model in the sub-€400 price category. Starting with the included dust collection station, which not every robot vacuum manufacturer includes in the scope of delivery, the Roidmi robot vacuum offers a good overall package of quality, efficient cleaning and easy operation.
Of course, there are robot vacuums that perform better in terms of cleaning, runtime or mopping function. However, that also comes at a price. Bargain hunters can buy here without hesitation!
Specifications
Cleaning
- Suction power
- up to 2700 Pa
- Suction modes
- Quiet, Standard, Power, Max
- Noise levels
- 45 - 75 dB
- Container
- 300 ml dust, 250 ml water (hybrid)
Navigation
- Type
- LiDAR tower
- Room map
- Yes
- Room layout
- Yes
- Restricted areas
- Yes
- Virtual Wall
- Yes
Connectivity
- App
- Xiaomi Home / Roidmi app
- Connection
- WiFi 2.4 GHz
- Alexa
- Yes
- Google Home
- Yes
Battery
- Capacity
- 5200 mAh
- Runtime
- approx. 240 min.
- Charging time
- 5 hours
Size & weight
- Size
- 35 x 35 x 9.8 cm
- Weight
- 3.6 kg (2.7 kg suction station)
What’s included
1x robot vacuum 1x mopping attachment 10x disposable mop cloths 1x cleaning tool 1x auto-empty station 4x dust bags 1x power cable 1x manual

































Comments