Skip to content

Xiaomi Mi5C – First smartphone with Surge S1 SoC

Xiaomi is not present at MWC Barcelona, but still released a new smartphone with its own developed processor today. The Xiaomi Mi5C is the first smartphone with the so-called Surge S1 chip.

Xiaomi Mi5C smartphone
Contents

Xiaomi Mi5C with Surge S1

It has been known for several weeks that Xiaomi will soon launch its own processor series, similar to Samsung or Huawei. The codename "Pinecone" fuelled the rumour mill, but it has now been revealed. The first Pinecone processor is called Surge S1 and belongs to the mid-range processor class. Naturally, simply publishing a processor would be boring, which is why Xiaomi also announced the matching mid-range smartphone, the Xiaomi Mi5C.

Surge S1 chip

Processor and memory

The Surge S1 is a 64-bit processor with 4 Cortex A53 cores clocked at 2.2 GHz and 4 Cortex A53 cores clocked at 1.4 GHz. Through the use of ARM big.LITTLE technology, Xiaomi promises a high-performance and energy-efficient system-on-chip. Further features include a Mali T860 GPU, which works 40% more efficiently than the previous generation, the Mali T760, and also supports the latest Vulkan API.

The 32-bit DSP (Digital Signal Processor) of the Surge S1 enables VoLTE, with Xiaomi promising a significant improvement in voice quality. Calls via VoLTE are made directly over LTE, meaning digitally based on the IP protocol. The manufacturer specifies a maximum sampling rate of 16 kHz. Xiaomi aims to improve image data processing with the 14-bit dual ISP (Image Signal Processor). In particular, photo captures in low-light conditions should benefit. The Surge ISP algorithm is intended to increase light sensitivity by 150% and reduce image noise. In benchmarks, the Pinecone SoC performs comparatively well. Geekbench 4 measured multi-core scores of 3,399 points, placing the SoC clearly above a Qualcomm Snapdragon 625. The memory specifications of the Xiaomi Mi5C are impressive. In addition to a 3 GB dual-channel LPDDR3 RAM, the smartphone also offers 64 GB eMMC 5.0 flash storage.

Surge S1 specifications

Display and camera

It has a 5.15-inch JDI display with a Full-HD (1920 x 1080) resolution. The brightness is above average at 550 nits, meaning the display should remain readable even in sunlight. The contrast ratio is 1,500 : 1, and the NTSC colour gamut is covered 94.4%. In terms of software, the Mi5C offers various display settings for colour temperature and also includes an eye-care mode that filters blue light.

The main camera has a resolution of 12 megapixels. Comparing the specifications published by Xiaomi with current Sony IMX image sensors suggests that the Sony IMX386 image sensor is likely installed. The main camera features include a pixel size of 1.25μm, an f/2.2 aperture, a 27 mm wide-angle lens, PDAF and an LED flash. The front camera has a resolution of 8 megapixels and offers an f/2.0 aperture as well as numerous software correction options.

Xiaomi Mi5C

Connectivity and battery

All current mobile radio standards are supported. It is not yet known whether the Xiaomi Mi5C will also support the LTE bands used here. For wireless data transmission, the smartphone is equipped with dual-band Wi-Fi (802.11a/b/g/n/ac) and a Bluetooth 4.1 module. The sensor equipment is average and includes, in addition to the usual sensors, a infrared and a fingerprint sensor. Navigation is via GPS, A-GPS, GLONASS and Beidou.

The battery has a capacity of 2,860 mAh. The smartphone is connected via a USB Type-C port. A fast charging function has been integrated to allow the smartphone to be charged extremely quickly.

Xiaomi Mi5C Specifications

Conclusion

Xiaomi is venturing into new territory. While the in-house Surge S1 processor is no performance miracle, the specifications are quite respectable for a mid-range chip. It will be interesting to see how Xiaomi fares as a chip manufacturer and what high-end chips to expect. At least on paper, the Xiaomi Mi5C promises to become a decent first mid-range smartphone with a Surge S1 chip. How it performs in practice remains to be seen. The retail price in China is 1499 RMB, which corresponds to approximately €206.

Specifications

Processor and memory
CPU
Pinecone Surge S1 @2.2 GHz
GPU
Mali T-860
RAM
3GB
Internal storage
64GB
Display
Display size
5.15 inches
Display resolution
1920 x 1080 pixels
Display type
IPS
Cameras
Main camera
12 megapixels
*Aperture f/2.2
*PDAF autofocus
*LED flash
Front camera
8 megapixels
Wireless
Wi-Fi
802.11a/b/g/n/ac
Bluetooth
4.1
Navigation
GPS / A-GPS / GLONASS / Beidou
Sensors
*Brightness sensor
*Accelerometer
*Gyroscope
*E-compass,
*Infrared sensor
*Proximity sensor
*Hall sensor
Mobile network
SIM
Dual SIM
SIM type
Nano
Standards
2G, 3G and 4G
Battery
Capacity
2,860 mAh
Quick-Charge
Yes
Other
Fingerprint scanner
Yes
Operating system
MIUI 8
Size
14.4 x 69.7 x 7.1 cm
Weight
135g
Written by

Timo Altmeyer

Timo is the founder of techreviewer.de and a true technology expert. From smartphones to e-bikes, and from home cinema to smart homes, he always has his finger on the pulse of the latest trends.

To author profile →

Comments

Write a comment

By submitting, your name, email, and comment will be stored. Find out more in our Privacy Policy. We review comments with multiple links before approving them.

The techreviewer newsletter

The week’s top reviews, news, and deals – delivered straight to your inbox.