Contents
ROMO P2 and ROMO A2 at a glance
The second ROMO generation initially consists of the ROMO P2 and the more affordable ROMO A2. Both models vacuum with up to 36,000 Pa, detect obstacles using two fisheye cameras and several LiDAR/ToF sensors, and are now also said to detect very thin cables and transparent objects such as glass more reliably.
New is the LiDAR-guided mop arm, which swings out by up to 123° to reach further under furniture and closer to edges and table legs. Mechanical legs help it overcome individual thresholds up to 4 cm high and two-level obstacles up to a total of 8.5 cm.
The ROMO P2 is the top model. Compared with the A2, it adds features including the Floor Deodorizer, UV light around the dust bag, and additional drying functions for the station.

DJI ROMO P2: Design and build quality
My girlfriend now calls the transparent ROMO models “Space Taxi”, and she’s not entirely wrong: the ROMO P2 once again looks much more futuristic than the classic white or black robot vacuums.

Compared with its predecessor, the P2 looks a little more understated. The dark gray and conspicuous orange accents have been toned down somewhat and complemented by lighter shades of white. The basic design, with its visible inner workings, remains almost unchanged.
It’s a shame DJI hasn’t addressed one of my criticisms of the previous model. The black appliance power cable for the base station, which DJI supplies in three versions for the EU, UK, and Australia, still dangles down the back without any proper cable management.
I would hardly mind this on an ordinary household appliance. But on a product that puts so much emphasis on its design, the freely dangling black cable is all the more noticeable.

The robot itself is still 9.8 centimeters tall. There are now significantly flatter premium robot vacuums, but the height wasn’t an issue in my apartment. Those with lots of IKEA furniture at home should also generally be fine with a height just under ten centimeters. However, even a few millimeters can make all the difference with very low sofas or cabinets.

DJI ROMO P2: Setup and DJI Home app
After it is switched on, the ROMO P2 is quickly recognised by the DJI Home app, which guides users clearly through each step.
While many robot vacuum cleaners still communicate exclusively over 2.4 GHz networks, the ROMO P2 also supports 5 GHz. This eliminates the usual fiddling with the router or temporarily disabling the 5 GHz network.
The app remains clearly laid out and offers the familiar features for room cleaning, zones, no-go areas, and multiple maps.
There are also dedicated settings for households with pets. These let you mark pet areas, adjust obstacle avoidance and enable more intensive cleaning for particles such as cat litter. Suction frequency and maintenance reminders can also be adjusted to account for larger amounts of pet hair.
In my test, the video function was a little more sluggish than its predecessor. The connection and transmission sometimes seemed slightly delayed. However, the test was conducted using a beta version of the DJI Home app, so I would not yet blame the robot itself.
This time, camera access is not protected by a PIN alone, but requires a password prompt. DJI has also announced a local data mode for the end of 2026, which will allow the app to be used without an internet connection and is intended to keep data local.
DJI ROMO P2: Mapping and navigation
If there’s one thing DJI does particularly well, it’s spatial orientation. The ROMO P2 creates its map quickly and with remarkable accuracy. It recognises room boundaries better than practically any other robot vacuum I’ve tested so far.

The kitchen, bathroom and bedroom were correctly identified automatically during the test and named accordingly. Naturally, things get more difficult with less common rooms. I still had to rename the dining room and study myself, which was quick and easy.
A further change becomes apparent while it is moving, one that is difficult to capture in a spec sheet. The P2 moves more smoothly than the first generation. The drive wheels move with significantly less resistance, and the characteristic electric motor noise while it is moving has almost disappeared. On wooden floors, this makes the robot’s rolling noise more noticeable, while the drive itself is barely audible.

DJI hardly needed to change anything about the overall precision. The robot still gets very close to furniture, baseboards, and other obstacles without constantly bumping into them.
The ROMO P2 handles door thresholds much more confidently with its mechanical legs. It is said to manage up to 4 centimetres for single-step obstacles and 8.5 centimetres for two-step obstacles. By comparison, its predecessor managed just 2.5 centimetres. The P2 breezed over the normal, and therefore rather low, door thresholds in my test.
DJI ROMO P2: Obstacle detection
The dual fisheye cameras now work alongside several LiDAR or ToF sensors, which are said to improve detection of very thin objects and, more recently, transparent ones too.
Obstacle detection works exceptionally well in everyday use. The ROMO P2 detected classic problem cases such as light-colored cables just as reliably in my test as stray socks or a clothespin that had fallen on the floor.

But even DJI’s sophisticated sensors aren’t infallible. The ROMO P2 repeatedly tried to squeeze under my wall-mounted toilet. Because the toilet slopes downward toward the back, the clearance gradually decreases until the robot would scrape its top against the plastic surface. I had no choice but to mark the area as a no-go zone.
However, this isn’t a problem specific to DJI. Robot vacuums from other manufacturers have also struggled in exactly this spot. The geometry of these bathroom fixtures is simply unfavorable for sensors that only point forward.
Apart from that, I didn’t have to rescue the P2 even once during the entire test. It reliably found its way back to the station and never got stuck anywhere else.
The repositioning of the LED spotlight improves visibility in the dark. On the previous model, the additional LED was clearly visible on the front, directly below the camera. On the ROMO P2, it has been moved underneath and is practically invisible to the naked eye.

The light is now spread very low across the floor. In the dark, you can clearly see the area directly in front of and to the sides beneath the robot being illuminated evenly. This is intended to give the sensors additional information, especially when detecting fine particles and dark cables.
Vacuuming and mopping performance
With a maximum of 36,000 pascals, DJI has significantly raised the suction power on paper. Its predecessor managed 25,000 pascals. In everyday use, however, the difference is far less dramatic, as the first generation was already exceptionally powerful.

Both the ROMO P and ROMO P2 clean hard floors and carpets very thoroughly in my home. I could not identify any clearly visible advantage of the P2 when dealing with ordinary dirt. What is new is that it adapts its cleaning strategy more closely to the detected dirt.
The P2 reacts extremely quickly on carpets. As soon as it rolls onto one, it detects the change in flooring and immediately switches to the intensified carpet mode.

The new generation still doesn’t leave its mop pads at the station, but they are lifted high enough to keep the fibers dry. With the first ROMO, the tips of the mop pads could still brush lightly against high-pile carpet. That doesn’t happen here.
The P2 also handles long hair well. After several weeks, no significant amount of hair had become caught on either the main brush or the side brushes. The main roller is split down the middle and has soft bristles at the outer edges, guiding hair neatly towards the suction inlet rather than letting it wind around the axles.
The new swing arm makes all the difference
For me, the biggest improvement is in mopping. Even the first ROMO could extend its right mop pad outward to clean very close to baseboards. On the P2, the pad is now attached to a much more flexible swing arm with its own LiDAR sensor. It swings through up to 123 degrees and extends up to 12.4 centimeters outward. That’s 7.8 centimeters more than its predecessor.

When the robot moves along a wall, the mop extends to within a millimetre of the edge and continually adjusts its distance. You can actually watch the arm follow the contours.
This was especially clear at my fridge. There is only a narrow gap between the floor and the fridge door. The robot itself naturally cannot get in there, but it simply pushed its extended mop under the door and cleaned the area anyway.

The arm works very precisely around table and furniture legs. Only in sharply right-angled corners does it occasionally leave something behind. Ultimately, even an extendable mop pad can’t fully overcome the robot’s round shape.
As for the actual mopping results, I could not find any major differences from its predecessor. The ROMO P2 mops with even dampening and handles everyday dirt well. It has to go over stubborn stains more often, and in really tough cases, the only option is ultimately to tackle them by hand with a mop.

However, it uses up water fairly quickly. When cleaning larger areas and mopping frequently, the fresh water tank needs to be refilled accordingly often, sometimes after just one cleaning cycle.
The P2 also reliably detects liquids. The software can treat these areas separately, so the robot does not simply drive through the liquid with its brushes and wheels and spread it further.
DJI ROMO P2: Station and maintenance
After several weeks of almost daily use, the area around the wash tray remained remarkably clean. According to DJI, the new wash tray features a “nanocrystalline surface” that is supposed to make dirt less likely to stick. Four high-pressure nozzles rinse the area, while an enlarged drain carries away dirty water, hair, and larger particles.

According to DJI, this means the washing area can go up to 365 days without manual cleaning. However, this refers only to the wash tray itself. You’ll still need to refill the clean-water tank, empty the dirty-water tank, and replace consumables, of course.
Over time, only a light film formed, with a few small crumbs of dust left behind here and there. This was similar with the predecessor and can be dealt with in a few quick steps under the tap.
After mopping, the station automatically cleans the mops and then dries them. In my case, drying takes about three hours. I did not notice any unpleasant smells, even after several weeks. The automatic emptying of the dust container is just as loud as on its predecessor.

DJI ROMO P2: battery life
My apartment is around 75 square meters. The robot takes about 90 minutes to complete a full run in standard mode. Afterward, the battery is still at around 50 percent. That leaves enough reserve for at least one full run in larger apartments.
It charges at up to 55 watts, taking around two and a half hours for a full charge. The P2 also tops up its charge a little each time it returns to the station during cleaning to wash its mops.
Our verdict
The ROMO P2 does many things better, but little is fundamentally different from its predecessor. That’s not really necessary, since the ROMO P was—and still is—a very good robot vacuum.
The biggest difference for me is the new swing arm. It extends much farther out, follows edges very precisely and reaches places the robot itself can’t. The quieter operation, very fast carpet detection and slightly improved obstacle avoidance are also positives. By contrast, you hardly notice the higher suction power of 36,000 Pa in everyday use. The predecessor was simply already too good.
If you already have a ROMO P, there’s no need to switch. But the P2 is the better choice for newcomers. It’s just a shame that DJI still hasn’t sorted out the cable management on the back!
Specifications
Robot vacuums
- Height
- 9.8 cm
- Mop lift
- Yes (automatically on carpets and in vacuum-only mode)
- Brush
- Split main brush with anti-tangle design
- Side brushes
- DualSweep dual side brushes with anti-tangle design
- Suction power
- 36,000 Pa
- Dust container
- 215 ml
- Mopping system
- Two rotating mop pads + LiDAR-guided 123° swing arm
- Pivot arm
- 7.8 cm more reach than its predecessor; mops up to 4.5 cm farther under furniture
- Carpet detection
- Yes (mop lift, suction boost, lowering pressure plate and automatic rear lift)
- Odour removal
- Yes (automatic floor deodorizer)
- UV sterilization
- Yes (UV light in the dust bag compartment)
- Camera
- Dual-fisheye camera system with 3D detection
Station
- Type
- All-in-one dock with automatic dust emptying, hot-water cleaning and drying
- Dust bag
- 2.4 L disposable bag
- Water tanks
- 4 L fresh water / 3.2 L dirty water
- Mop drying
- Hot air (automatically after the wash cycle)
- Hot water cleaning
- Yes (up to 80 °C according to DJI)
- Cleaning agent
- DJI Cleaning Solution + Floor Deodorizer
- Automatic dosing
- Yes
- Washing area
- Nanocrystalline surface with 4 high-pressure nozzles
- Dirty water drain
- 16 mm
- Self-cleaning
- Automatic; according to DJI, up to 365 days without manually cleaning the washboard
- Dustbin drying
- Yes
- UV light
- Yes (dust bag)
- Noise level during dustbin emptying
- Approx. 65 dBA according to DJI laboratory measurements
Navigation & obstacle detection
- Navigation system
- Dual fisheye cameras + area-array LiDAR / ToF sensors
- Additional sensors
- Side LiDAR, LiDAR in the swivel arm and top-mounted collision sensor
- Object recognition
- Cables from 2 mm thick, as well as transparent obstacles
- Transparent objects
- Yes (including glass, transparent plastic bags and vases)
- Ambient light
- from 0.1 lux
- Obstacle clearance
- Up to 4 cm in one step / up to 8.5 cm in two steps
- Mapping
- Multi-floor mapping
- Room layout & zone cleaning
- Yes
- No-go and no-mop zones
- Yes
- Lighting assistance
- Underside dirt-detection light, illuminating up to 2,000 cm²
Connectivity & controls
- App
- DJI Home app (iOS / Android)
- Functions
- Live video, remote control, two-way audio, cleaning statistics, dirt map
- Wi-Fi
- 2.4 GHz + 5 GHz
- Wi-Fi standard
- 802.11 b/g/n + 802.11 a/n/ac
- Bluetooth
- Bluetooth 5.0
- AI Assistant
- Yes (in our beta app, only in Chinese at the time of testing)
- Map management
- Multi-storey maps
- Local Data Mode
- Announced for late 2026
Battery & runtime
- Capacity
- 5,000 mAh / 72 Wh Li-ion
- Runtime
- up to 180 min (vacuuming only in Quiet mode)
- Charging power
- 55 W
- Charging time
- approx. 2.5 hours
- Recharge & Resume
- Yes (automatic continuation after recharging)
Size & weight
- Robot
- 35.1 × 35.1 × 9.8 cm, approx. 4.9 kg
- Base station
- 42.5 × 45.3 × 44 cm, approx. 10 kg
What’s included
1x DJI ROMO P2 robot vacuum 1x DJI ROMO P2 base station (water tank version) 1x base station floor plate 1x DJI Cleaning Solution 1x DJI Floor Deodorizer 1x replacement brush 1x Clean More Combo package 3x power cables (EU / UK / Australia) 1x user manual
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 989,00 € | Go to store |
| DJI | 1.299,00 € | Go to store |



















Comments