Contents
Preface: EKEN H9S – Budget action cam
In terms of price, the H9 action cams are currently among the cheapest action cams on the market. The standard H9 model is available from €25. The H9R model with an additional remote control starts at around €35. Finally, there is the H9S model, which costs approximately €45 depending on the retailer. The assessment is based on this pricing. Comparing the EKEN H9 models with a GoPro HERO6 or YI 4K+ that are many times more expensive would be inappropriate!
Included in delivery, design and build quality
The accessories included with the EKEN H9S are impressive. Despite the low price, the action cam comes with a waterproof case, numerous mounts, a remote control, two batteries with a charger, and even a tripod. The included accessories are quite impressive and other manufacturers could take a leaf out of this. The build quality of the accessories is largely beyond reproach.
Regarding the design, the EKEN H9S follows the typical 'SJ4000 design' known from numerous other Chinese action cameras. The camera's housing is made entirely of plastic. The front features a large EKEN logo and the text '4K Ultra HD'. Due to the relatively high brand recognition of EKEN action cameras, numerous knock-offs are already circulating. One should ensure that the EKEN logo is present to avoid potential fakes! Further features on the front include a power/mode button with a status LED next to it. Naturally, the lens with a 170° wide-angle view is also located on the front.
On the housing frame, the ports are located on one side. These comprise a Micro USB socket, a Micro HDMI socket, and a MicroSD memory card slot. The ports are exposed and are therefore not protected from dust or water! On the opposite side are two further control buttons, used for scrolling through the menu. The battery compartment is typically located on the underside of the frame. There is no option to connect a tripod to the action camera. The top surface features the record button and another status LED.
The rear of the casing features the 2-inch display. This is a conventional LCD without touch functionality, which would not have been expected given the price. The display resolution is 320 x 240 pixels. The build quality of the EKEN H9S is generally faultless and matches the price of the camera.
Hardware
The EKEN H9, H9R and now also the H9S rely on identical hardware equipment. The image processor is designated "SPCA6350A". Theoretically, this SoC can encode videos at a maximum resolution of 1080p and 60 frames per second in H.264. Images are recorded with a maximum resolution of 24 megapixels. How does the EKEN H9S manage to record videos in "4K"? The processor cannot encode 4K videos with the H.264 codec due to performance limitations. Instead, individual images are taken, which are then assembled into a video by the MJPEG video codec.
Additionally, the processor offers the so-called ‘Super Resolution’ function, which is nothing more than interpolation. The native image is artificially upscaled to the desired size. The fact that the promised 4K function is achieved only through interpolation is primarily shown by the image sensor used. This is an OmniVision OV4689, which natively resolves only 4 megapixels, i.e. 2688 × 1520 pixels (2.7K). As can be seen, the EKEN H9S is also a ‘4K cheat camera’. A native 4K video resolution would not have been expected given the price. Another hardware feature is a 2.4 GHz WiFi module, which enables control via app and remote.
Setup and user interface
To use the action camera, you only need to insert the battery and a microSD memory card. Various SDHC and SDXC memory card models up to a maximum size of 64GB were recognised without any problems. An overview of the operation and the individual functions of the EKEN H9S can be found in the illustrated and, as far as we can tell, well-written user manual.
When you switch on the action cam, you are first greeted by an EKEN logo and the subsequent start screen. The start screen displays the live feed and provides additional information on the selected recording mode, resolution, elapsed and remaining recording time, and battery level. The recording mode can be changed via the mode button. Pressing it multiple times also takes you to the settings. The gallery allows you to play back video recordings and view captured photos directly on the action cam. Here is an overview of all recording modes and settings.
Recording modes
Overall, the EKEN H9S offers 4 recording modes. Here is an overview:
- Video mode
- Photo mode
- Burst mode (multiple shots)
- Time-lapse photo (time-lapse recording with photos)
Settings
The setting options for the EKEN H9S are very limited. The following settings can be made.
- Video resolution – 4K@25 | 2.7K@30 | 1080p@60p/30p | 720@120p
- Looping video – On / Off (up to 1080p only)
- Date stamp – Off / Date / Date and time
- Exposure – +2 to -2 in 0.3 increments
- Image resolution – 12MP | 8MP | 5MP | 4MP
- Burst photo – 3 images
- Time-lapse – 2s | 3s | 5s | 10s | 20s | 30s | 60s
- Continuous Lapse – On / Off
- Refresh rate – 50Hz | 60Hz | Auto
- Language
- Date and time
- Sound – Shutter | Start-up | Beep | Volume
- 180° rotation
- Auto LCD – Off | 1min | 3min | 5min
- Power saving mode – Off | 1 min | 3 min | 5 min
- Format
- Reset
- Version
Importantly, there is no possibility to configure the Wi-Fi. This means you cannot define an SSID! Even password protection is omitted, so theoretically anyone with active Wi-Fi and proximity to the camera could connect to it.
Ez iCam and firmware
The EKEN H9S can be controlled either via the included remote, or by using the so-called “Ez iCam” app, which is offered free of charge for both Apple and Android mobile devices in their respective stores.
Overall, the app is rubbish. Establishing a connection between the app and the mobile device works without problems, but the app’s stability is a complete disaster. Both app and action camera crashes are not uncommon. The configuration options also leave a lot to be desired. The selectable resolution is limited to 1080p. The only positive aspect is the low transmission latency. If the app runs stably for more than a minute, the image is transmitted with barely any delay. It is not clear whether the crashes are related to the app or the firmware. In any case, the app ran without crashes during the previous test of the EKEN H9R, but offered the same range of features. Innovations are long overdue, even though the app has been on the market for over a year!
The firmware version is also incomprehensible. The action cam identifies itself as an EKEN H9R and has current EKEN H9R firmware installed. The fact alone that the cameras are identical in appearance and hardware suggests they are the same model. Regarding the firmware, it is far from optimised. Unexpected crashes were not exactly rare during testing. It frequently happened that the camera simply "froze", and only a hard reset by removing the battery helped. There is clearly a need for optimisation here!
Recording quality
Video quality of the EKEN H9S
Play video on YouTubeAssuming the action camera should cost no more than €45, the video quality is still acceptable. At 4K resolution, the action camera actually achieves 25 individual frames without doubling any frame. The same applies to 1080p at 60 frames per second. Noticeable is the strong image noise, which is mainly noticeable in 4K recording mode. At the same time, the action camera tends to display colours oversaturated in bright light. In poorer lighting conditions, artefact formation increases noticeably. Recordings become increasingly blurry and colours fade. There is no electronic image stabilisation! The recording quality of the microphone is predominantly tinny. When inserted into the waterproof housing, the sound is only captured slightly.
EKEN H9S photo quality
What has been said about video quality also applies to image quality. Points of criticism again include the dynamic range, the sometimes abundant artefact formation and the increasing blurriness in poor lighting conditions. In view of the price, nothing more could be expected regarding photo quality either.
Battery
The manufacturer states the battery capacity as 1050 mAh. In testing, with active 4K recording mode and standard settings, i.e. automatic display shut-off and deactivated Wi-Fi, an average runtime of 85 minutes was achieved. In 1080p@60 recording mode, the recording time averaged 60 minutes. A complete battery charge takes about 2 ½ hours.
As can be seen, the battery life of the EKEN H9S does not deviate from other so-called 'SJ4000 clones'. Despite the rather unusual battery format of the EKEN batteries supplied, alternative standard batteries are available and compatible with the action camera.
Our verdict
6,4 out of 10 pointsTake the EKEN H9R released in 2016, rename it the EKEN H9S, and you have a new budget action cam released in 2017. This is exactly what EKEN has produced here. The EKEN H9R and H9S are two identical action cam models that do not differ in the slightest.
Although the EKEN H9S does not introduce any novelties compared to last year's model and was likely released purely for marketing tactics, this action cam continues to offer an almost unbeatable price-performance ratio. In contrast to more expensive action cams, compromises must obviously be made regarding the feature set and recording quality, but the EKEN H9S or H9R is worth a look solely due to the extensive accessories included in the scope of delivery.
Specifications
Hardware
- Image processor
- Sunplus 6350
- Image sensor
- OV4689 (OmniVision)
- Viewing angle
- 170°
- Display
- 2.0-inch LCD
- Resolution
- 320 x 240
- Ports
- MicroUSB, MicroHDMI
- SD card
- SDHC / SDXC up to 64 GB
- Battery
- 1050mAh
Video resolution
- 4K@25fps
- 2.7K@30fps
- 1080p@60/30fps
- 720@120pfps
Photo resolution
- 12M
- 10M
- 8M
- 5M
Other
- *WiFi and app
- *Time-lapse image
- *Loop recording
- *Size
- 59 * 41 * 24.6 mm
- *Housing material
- ABS
What’s included
1x EKEN H9S 1x Bluetooth remote control 2x battery 1x waterproof housing 10x mounts 1x charger 1x USB cable 1x tripod 1x user manual



















Comments