Contents
Test: ENGWE EP-2 Pro
In time for the holiday season, the ENGWE EP-2 Pro arrived at my place at the end of July. In contrast to the previously tested FIIDO L3 and ADO A16, the ENGWE folding e-bike takes a slightly different approach.
The company from China has specialised particularly in e-bikes with extra-wide tyres. As a so-called e-fat bike or e-fatty, the ENGWE EP-2 Pro is not only a visual eye-catcher, the ultra-wide tyres also promise lots of grip in almost any weather and on any terrain.
ENGWE EP-2 Pro: First impressions
The e-bike was delivered safely packed in a standard cardboard box. Via the official ENGWE shop, it was shipped directly from the EU warehouse (Poland), so no further costs such as customs or import duties were incurred. Shipping took only a few days.
Before unpacking, the countless cable ties securing the folded e-bike in the box had to be released and the protective foam padding removed. Now the e-bike can be lifted out of the box, provided you have the necessary strength. With a weight of approx. 32 kg, the electric bicycle, folded to 81 x 38 x 76 cm, is quite heavy.
What’s included
Finally, the rest of the delivery contents comes to light, which, in addition to the e-bike, includes the following parts:
- a pair of pedals
- a charger (54.6 V 2 A)
- a tool set
- a key pair
- a user manual
Saddle, reflectors, etc. are already pre-assembled. Extras like an air pump or a smartphone holder, which are included with some other e-bikes, are not included. Otherwise, the ENGWE e-bike is ready to ride out of the box.
Assembly and build quality
At least almost, because you first need to screw in the pedals to set off. However, you only have to do this step once, as the pedals can then be easily folded up for transport afterwards. The tyres are already inflated, but you should still check the tyre pressure before driving. It is also important to perform a quick check of the brakes. On my test unit, they were set a bit too loosely. A quick adjustment and the brakes engage cleanly.
The remaining assembly or unfolding of the folding bike is completed within seconds and with just a few hand movements. Simply upright the folded handlebar, secure it with the safety latch, unfold the e-bike using the folding mechanism on the middle tube, secure it with the latch as well, and then adjust the saddle. Unfolded, the ENGWE EP-2 Pro reaches a size of 167 x 53 x 118 cm. This makes it barely smaller than a full-size bicycle.
Just as quickly as the e-bike unfolds, it can be folded back up in reverse order. There is no mechanism to keep the folding e-bike together when collapsed. Thanks to a kickstand, the folded e-bike stands stably on the ground without the chainrings touching it. A carrying handle on the frame makes lifting easier. The folding e-bike barely fits in the boot of a small car.
The material choice and build quality of the ENGWE EP-2 Pro are commendable given the price range. The welds are somewhat coarse but neat. Noticeable rattling, grinding or squeaking did not occur after several test rides. The same applies to the folding mechanism, which holds securely even after being folded and unfolded multiple times. Users should note the maximum load capacity of 150 kg.
The appearance, particularly regarding the striking ENGWE stickers on the frame, is a matter of taste. With 5 available colors, there should be a suitable color for everyone. The only thing that disrupts the overall look is the cable management on the handlebar. The cables visibly protrude from the handlebar and finally disappear just above the fork. This could have been solved more elegantly in terms of aesthetics.
ENGWE EP-2 Pro: Features
In terms of equipment, the ENGWE EP-2 Pro does not have to hide. The e-bike features a powerful electric motor, a large and simultaneously removable battery, and is well-equipped in other respects too.
An important point worth mentioning is the lack of road legality in Germany. The reasons for this include the overly powerful 750W motor, an undamped speed of more than 25 km/h, and the throttle handle, which turns the electric bicycle into a compact electric moped. Regulations may differ in other countries (including within the EU). Be sure to check local regulations before riding.
Large and removable battery
First, let's take a look at the 614.4 Wh battery (48V 12.8Ah) of the ENGWE EP-2 Pro (note: the new Upgraded Version uses a slightly more powerful 48V 13Ah battery). This is ideally housed directly in the frame, where it is best protected from external influences. Further advantages are optimal weight distribution, as the battery is one of the heaviest parts of the e-bike, higher frame stability and a better appearance, as the large battery doesn't disrupt the overall look when hidden.
The battery is secured by a lock located below the frame next to the folding mechanism. Only when the lock is unlocked with one of the included keys does the battery pack supply power or can it be removed from the frame. The lock acts as both a battery theft protection and an ignition switch. The only disadvantage is that the key must be permanently inserted while riding and the lock is difficult to hit. The key would likely have been better placed on the handlebar. Further details on range and charging time can be found further down in the test.
750W motor
The 750 watt rear-wheel drive turns the ENGWE EP-2 Pro into a real power beast. Thanks to the high 80 Nm torque, the e-bike accelerates effortlessly.
Essentially, the e-bike can be ridden in the following three modes:
- Mode 1: Pedal assistance. To get the folding e-bike moving, we need to pedal.
- Mode 2: Pedal Assist Mode. As the English term already suggests, this is pedal assistance. The motor only provides power once the pedals are lightly turned. The support level can be selected in five stages.
- Mode 3: Throttle. In this mode, you do not need to pedal; instead, you regulate the speed solely using the throttle grip on the handlebars.
As with the ADO A16, the ENGWE EP-2 Pro also features a hidden menu that can be accessed by holding the plus and minus buttons. The hidden menu allows users to, among other things, limit the speed to 25 km/h or adjust the tyre diameter, which ultimately affects the speed display.
There are also plenty of other settings here, but you should leave them alone unless you know what they do. The manual describes what each setting does.
Tires, lights and computer
A highlight is the chunky 20 x 4 inch tyres, which ultimately make the ENGWE EP-2 Pro an electric fat bike or e-fatty. A key advantage over conventional electric bikes is the high off-road capability of electric fat bikes. The wide tyres not only provide better traction, but are usually inflated to just 0.2 to 0.8 bar. This, in turn, provides a particularly cushioning effect.
That is precisely why many fat bikes forgo additional suspension. The ENGWE EP-2 Pro has a suspension fork but does without rear-wheel suspension. Nevertheless, the ride is exceptionally smooth. More on this later.
Mudguards made of metal are present on the front and rear wheels. The rear rack doubles as a passenger seat, although the maximum load capacity of 150 kg should not be overlooked. Further equipment features include mechanical disc brakes, a brake light that lights up when braking and a bright LED headlight.
Centrally mounted on the handlebars is the cycle computer (Yolin YL80C), whose illuminated display remains readable in the dark. It shows speed, battery level, PAS level, total range and the trip including current range and average speed. To the left of the display are the bell and the power on/off plus plus-minus button for operating the cycle computer.
There is no electric horn here, as found on some other Chinese e-bikes. On the right side of the handlebars, we finally have the throttle and the shift lever of the Shimano 7-speed SIS gearbox.
ENGWE EP-2 Pro: Ride test
Now the big question. How does the ENGWE EP-2 Pro actually drive?
Pedal Assist Mode
Strictly speaking, pure pedal operation only exists when the e-bike is turned off. When switched on, the electric bicycle automatically enters Pedal Assist Mode level 1, which engages the motor with approximately 3 seconds of delay after you start pedalling. The sensitivity of the torque sensor can be adjusted in the advanced settings.
Using pure pedal power, you can reach a speed of approx. 15 km/h in the 7th gear of the Shimano gearbox before the cadence becomes too high. Gear changes from 1st to 7th gear are smooth. However, the Shimano SIS gear system is known for requiring occasional adjustment.
If you activate the PAS up to level 5 in parallel with the gears, you reach a top speed of approx. 35 km/h on straight roads. At least, I was able to measure this speed with a body weight of 85 kg. Those who are lighter might be able to squeeze up to 40 km/h out of the ENGWE EP-2 Pro. When you stop pedalling, the PAS stops with a slight delay. Braking stops the PAS immediately.
Scooter mode
The moped mode or throttle mode also does not need to be activated separately. As soon as there is no pedalling motion, you can accelerate using the throttle. The acceleration is only minimally delayed. If you hold the throttle for 8 seconds, the e-bike activates the cruise control. The speed is now maintained constant.
Driving feel
Thanks to the wide 20 x 4-inch tyres, the ENGWE EP-2 Pro provides a harmonious and safe riding feel. People up to 1.95 m in height can ride the folding bike without problems. Although the e-bike is only suspended at the front via the fork, it rides comfortably smoothly even on uneven surfaces. The ENGWE e-bike handles rides on roads, field paths, or through the forest well. Depending on the situation, the suspension can be locked via the lockout. The bicycle saddle with a central cut-out is comfortable and also suitable for longer tours.
Battery and range
As promised, a few final words on the battery and range. Range is always difficult to quantify, as it depends heavily on riding style, rider weight and geographical factors. The range measured in the test averaged 35 km in throttle mode. At least, this applies at a body weight of around 85 kg and predominantly flat terrain. In PAS mode, a slightly higher range can be squeezed out. Here, up to 60 km is a realistic value.
Theoretically, the battery does not need to be removed from the e-bike for charging. Access to the charging port is provided via a small hole in the frame. However, it is more comfortable to remove the battery and charge it separately from the bike. The charging time is a good 6 hours.
Our verdict
The ENGWE EP-2 Pro convinced me completely and is the best e-bike I have tested so far. Admittedly, there are some points of criticism here too, such as the unfavourable placement of the lock, the lack of securing mechanism in the folded state, or the unattractive cable management from the handlebar to the fork.
However, the positive impressions outweigh the negatives. Thanks to the wide tyres, the ENGWE EP-2 Pro offers surprisingly good handling, even on rough terrain. Proper mountain bikes certainly offer significantly better riding characteristics, but one should not forget that we are dealing with a compact folding e-bike. Ignoring the lack of road approval in Germany, there is a clear recommendation for the ENGWE EP-2 Pro!
Specifications
Motor
- Type
- Brushless
- Performance
- 750W
- Speed
- up to 45 km/h
Battery
- Type
- Lithium-ion
- Tension
- 48V
- Charge
- 12.8Ah
- Energy
- 614.4 Wh
- Range
- 60 km (electric), 120 km (assisted)
- Charging time
- ~5-7 hours
Features
- Gears
- 7 (Shimano)
- Translation
- s ratio: Unknown
- Operating modes
- Manual, pedelec, moped
- Tires
- 20" x 4"
- Disc brakes
- Front + Rear (Tektro)
- Computers
- Yes
- Splash protection
- Yes
- Suspension
- Yes (air damping)
General
- Material
- Aluminium
- Load capacity
- 150 kg
- Size (folded)
- 81 x 38 x 76 cm
- Size (unfolded)
- 167 x 53 x 118 cm
- Weight
- 32 kg
Price comparison
| Store | Price | Link |
|---|






























Comments (26)
Hi Timo. We own 2 of these bikes and are very satisfied. Excellent riding characteristics. Unfortunately, a display is defective due to the lack of a lock when folded. We haven't found a replacement yet, as everything was described in English. We are also missing a German user manual. Perhaps someone here can help us. In any case, we will enjoy our bikes again on the island of Fehmarn from Easter Sunday onwards. Kind regards and have a nice weekend, Brigitte and Andreas.
Hi Andreas,
glad to hear you like the EP-2 Pro. You can download the German manual via this link. https://engwe-bikes.com/pages/owners-manual
The issue with the display is naturally unfortunate. ENGWE provides a 1-year warranty on defects, which include those affecting the display. Naturally, this only applies if the defect was not self-caused. Alternatively, you can order a replacement display directly from the manufacturer. For example, the display is available on AliExpress for around 62 euros with shipping from China. Here is the link: https://s.zbanx.com/r/dB1tIEOolpog
Kind regards
Timo
Hello Timo,
I received my engwe EP 2 pro today, everything top,,, bbbbbut unfortunately it only goes 25kmh ,, is there a way to optimize the speed.
Thanks in advance Uwe
Hello Timo,
could you please say something about the motor noise again?
Is silent cruising possible with it, or does the bike roar like a lion?
Kind regards,
A. Rüter
Hello A. Rüter,
in my eyes, the bike is not conspicuously loud, nor louder than other e-bikes. Of course, the drive noise can be heard, especially on inclines, but it does not bother me personally. The bike is far from making a loud roaring sound.
Kind regards
Timo
Hello Timo. I have now received the third display and it was wrong again. I ordered it specifically with photos of the display's original number and the plug. Apparently no one is there who can read. I can turn on the last one without inserting the key, but then it shows error code 030, indicating a defective brake. I was told in an email that I should please have the electronics changed. I fitted my wife's display, everything works. Fitted the replacement display to my wife's bike, same errors. I have been waiting for a reply for three weeks now. Also no return possible apparently. So we are going on holiday without bikes. We are really disappointed now, even though we really enjoyed using them. Regards Andreas OK
Hello Timo
How can I disable the throttle (gas lever)
? Turn it off?
Regards
Hi Alexander,
here is how:
1. Switch off the bike.
2. Hold the throttle at full power and press the right brake.
3. Switch on the bike and hold the power button until the display shows the speedometer.
4. Keep the throttle and brake pressed for a further 10 seconds.
The throttle should then be switched off. You can reactivate the throttle using the same steps.
Hello, I am very satisfied with the bike, but there is an issue with the range. So far, I have only ridden just over 100 kilometres, but the battery in my bike dies after 25 km. I was riding in level 9 without using the pedals much. Is the battery really that bad?
Regards, Richard
Hi Richard, that is a quite plausible value if you are mostly riding electrically. The range depends very strongly on how you ride the bike, the weight of the rider, whether you take many inclines, etc.
Kind regards
Timo
Hi Timo, the bike is great. Question: how can I make the bike street-legal?
Hi Matthies, unfortunately, that won't work. To be classified as a pedelec, it must, among other things, have a maximum nominal output of 250W. For anything else, the operating permit is missing.
Joachim Complete nonsense, you can get it registered and insured. Regards Joachim
Then please tell me how, as I would like to buy it.
Hello Joachim,
how did you manage to get the certification?
Please provide info.
Regards
Uwe
Hi Timo
, can you tell me a bit about the wear parts on this bike?
The brakes are made by “Wuxing” … where can you get replacement brake pads when they’re worn out?
and additional question: can you also drive slowly, i.e. actually a maximum of 25-30?
Regards Michael
Hi Michael, these parts are also very interchangeable with spare parts from other manufacturers. You can get genuine spare parts, among other places, via the ENGWE shop on AliExpress, which I linked to in the comments above.
You can adjust the speed via the advanced settings of the bike computer.
Kind regards
Timo
Hello,
Is there a way to legally operate the wheel in Germany (for example, with moped insurance, a motorcycle licence, or a self-imposed speed limit)
Kind regards
Martin Seeger
How does this pedelec work regarding registration and insurance?
Kind regards
Hello Timo. Thanks to your review, we have had 2 new EP2s at home since yesterday. I have to say that the minus points you gave them are insignificant. Today we aired them out a little and fine-tuned them. They are great. We also have larger e-bikes at home, the Czech Crusiss. I can select the possible range element on their display. Here I found in the manuals that consumption or instantaneous power can be displayed. However, I haven't figured out how to access this menu. Could you please advise me? Tono, Slovakia
Hi Joachim, how do I get it insured? The insurance company wants to see a registration document.
Regards Peter
Hi, Timo.
I didn’t find the knob which I should push in order to start the bike working.
Can you help me to switch it on?
Hi Edward,
it’s below the plus-minus buttons.
Thank you for your excellent appraisal of this bike. Real food for thought!
I would be interested in what the invoice looked like. Delivered with
a Polish VAT identification number?
Was the VAT listed separately on the invoice?
So net plus tax equals gross price?
Thanks, Christian
Hi Christian, unfortunately I cannot answer that for you. The e-bike was a loaner and went back to the manufacturer after the test.