Contents
ENGWE S6: Unboxing
The ENGWE S6 e-scooter comes in typical ENGWE packaging. A large cardboard box with plenty of packaging material for safe transport and a nearly ready-to-ride e-scooter.
In addition to the e-scooter, the delivery includes an active 54.6V 3.0A charger with a fan, the typical tools consisting of 4 Allen keys, and a very brief quick-start guide.

No extensive instruction manual is required for assembly. Simply unfolding and securing the seat and handlebars is sufficient. The battery was already half charged, so you could immediately set off for a first test ride.
ENGWE S6: Features and build quality
The ENGWE S6 is hardly comparable to the rentable e-scooters standing at nearly every street corner. Starting with the tyres, we are dealing with 10" tubeless tyres featuring a rugged off-road tread.
It also features disc brakes at the front and rear, as well as full suspension with a suspension fork and twin rear shocks.

A distinctive feature of the ENGWE S6 is the pre-mounted, particularly soft seat, which also features a damper. The seat itself is foldable, removable and height-adjustable.
It is secured in a foldable bracket using a quick-release skewer, which is itself held by a locking quick-release skewer. If the seat is not required, the bracket can also be unscrewed completely.

The deck is 45 cm long and 22 cm wide, so both feet can fit side by side. A centrally placed griptape sticker with the ENGWE logo provides better grip while riding. The 48V 15.6Ah battery is hidden inside the deck. It is charged via a side charging socket, which is protected against water by a plastic cover.
The entire scooter is protected against splash water according to IPX4. The ENGWE S6 can withstand a ride in the rain.

On the other side of the deck is a foldable kickstand. Additionally, there are illuminated indicators on both the front and rear of the deck on both sides, as well as a double-sided RGB LED light strip that turns the ENGWE S6 into a mobile disco ball. More on that later.

At the front, there is a handlebar with a width of 60 cm and a fully extended height of 90 cm, measured from the deck. Both handles can be folded for transport.

When folded, the electric scooter, which weighs around 25 kg, can be lifted and carried by the handlebar stem. A locking hook prevents the stem from coming loose while carrying. Setting up and folding down take just 20 seconds.

On the handlebar itself, the throttle and front brake are on the right, next to the LC display and below it is the ignition switch. On the left of the handlebar, there is the rear brake, the indicator lever, a button for the electronic horn and another button for the lights.
ENGWE has implemented the wiring well enough that it does not become distracting during rides.

The LCD displays the remaining battery (5 bars), speed in km/h, voltage, trip and ODO. There are no buttons for making settings. Finally, at the front, there is a front headlight with 4 LEDs. The brake light on the rear mudguard is also illuminated.

The build quality of the ENGWE S6 is acceptable. The scooter's construction leaves an overall stable impression. The quality of the control panel on the left handlebar could be improved. In particular, the indicator switch feels wobbly.
ENGWE S6: Field test
After examining the features of the ENGWE S6, we now move on to the actual practical test. The e-scooter had to prove itself in various disciplines during testing. One thing first: the e-scooter has no road approval and must not be operated on public roads within Germany.
I liked the handling of the ENGWE S6. The e-scooter is very agile and glides smoothly due to the extensive suspension. The e-scooter handles off-road terrain quite well.
Noticeable was the rattling holder on the handlebars, which is attached to the seat in the folded state. A rather annoying matter that ENGWE would have preferred to solve differently.

Another point of criticism is the handlebar, which is somewhat too short despite the height adjustment. People over 1.80 m have to reach significantly lower than usual when riding standing up. The handlebar height causes no problems when sitting.
The acceleration of the ENGWE S6 is impressive. The throttle responds directly and precisely. Speed is very well regulated via the throttle. In testing, the top speed on a straight road was approx. 35 km/h. The 45 km/h promised by the manufacturer was barely reached only when going downhill.

Unfortunately, it is not possible to manually switch the total of 3 speed levels, which is why the e-scooter only switches to the highest driving mode from a speed of around 25 km/h.
Power is particularly lacking uphill to automatically shift into the highest gear, so even on gentle inclines, the speed drops below 20 km/h. The motor can be locked via the ignition switch.

The 60 km range specified by ENGWE was not achieved in the test. This is not surprising, as most manufacturers base this on figures recorded under laboratory conditions. A range of 35 km is a realistic figure for moderate riding over predominantly flat terrain. Fully charging the scooter takes approximately 7 hours.
ENGWE has not spared on lighting. Anyone who switches on the lights via the button on the handlebars will thereafter move around like a lit Christmas tree. The LED front headlight is linked to the RGB side lighting, which rhythmically switches between red, blue and green.
Separately switching the front headlight and RGB lighting does not work. Either party lights or no lights!
The brightness of the front light is good, so nothing stands in the way of riding in the dark (if you like party lighting). The indicators are also nice-to-have, but due to their side position, they are barely visible from the front and rear.
Our verdict
The ENGWE S6 is definitely no ordinary e-scooter. Thanks to its extensive suspension, the ENGWE e-scooter can withstand a lot of off-road use. Although the manufacturer's stated maximum speed of 45 km/h was only achievable downhill, the ENGWE S6 is no slouch on flat terrain, reaching around 35 km/h.
With a range of approximately 35 km, the ENGWE S6 also does not look bad, even though this figure is still some way from the manufacturer's lab claim of 60 km.
A gimmick is the RGB lighting, which ENGWE unfortunately coupled to the headlight (why?). Here it is either party lights or no lights!
Nevertheless, the ENGWE S6 is a fun ride, but it is not approved for use on public roads in Germany.
Specifications
Motor
- Type
- Brushless
- Performance
- 500W (700W peak)
- Speed settings
- 3
- Speed
- up to 45 km/h
Battery
- Type
- Lithium-ion
- Tension
- 48V
- Charge
- 15.6 Ah
- Energy
- 748.8 Wh
- Range
- up to 60 km
- Charging time
- ~5-7 hours
Features
- Tires
- 10" x 6,5"
- Disc brakes
- Front + rear
- Computers
- Yes
- Suspension
- Saddle + front and rear wheel
- Lighting
- RGB, brake light, LED headlight, indicators
General
- Material
- Aluminium
- Load capacity
- 120 kg
- Size (folded)
- 110 x 25 x 55 cm
- Size (unfolded)
- 110 x 25 x 110 cm
- Weight
- 25 kg
Price comparison
| Store | Price | Link |
|---|---|---|
| Geekbuying | 489,00 € | Go to store |
| Geekmaxi | 649,00 € | Go to store |










Comments (2)
Hi, how does registration work in Germany?
Can you register it without issues if you have a class B driving licence?
Hi Albrecht,
In Germany, the S6 does not have a valid operating permit and therefore does not receive road approval.