Contents
Preface: FRITZ! Mesh Set
It is difficult to provide a larger living area with just one Wi-Fi router. Usually, multiple dead spots occur where no Wi-Fi signal is received. Repeaters provide a remedy by extending the network. However, the Wi-Fi switching of end devices can cause problems. It can happen that the end device remains connected to the original network despite better reception from the repeater network, and no switch occurs. Intelligent mesh is intended to compensate for this disadvantage and enable seamless and uninterrupted Wi-Fi coverage.

Design, build quality, and included accessories
The FRITZ! Mesh Set includes everything required to set up a small mesh network. The scope of delivery includes the FRITZ!Box 7590 with the respective connection cables and manuals, as well as a FRITZ! WLAN Repeater 1750E.
The FRITZ!Box 7590 comes in a sleek red and white design. The router can be used lying flat or mounted on the wall. The antennas are unobtrusively hidden inside the housing. On the top of the housing are the status LEDs, which provide information on DSL, WLAN, telephone, WPS and info. Detailed labels are present. Adjacent control buttons control the respective function.
The connectivity options consist of a side USB 3.0 port and a port for analogue telephony. On the rear there is another USB 3.0 port, a WAN port, four gigabit LAN ports, two analogue telephone ports, an ISDN port, an internet port and the power connection.

Setup & User Interface
Setting up the FRITZ!Box and the repeater is straightforward. The setup wizard provides clear guidance through all steps. Users of an older FRITZ!Box can transfer existing configurations to the new model. The FRITZ!Box 7590 ships with FRITZ!OS 6.83 but can already be updated to FRITZ!OS 7.

The FRITZ!OS 7 user interface is extensive. There are many setting options and features. However, this also makes the system nested, and the desired feature can only be found after several clicks. Useful features include an integrated media server, a NAS, smart home control and mesh management.
Performance
Wi-Fi & Mesh
The FRITZ!Box 7590 is, among other things, a dual-band AC router that can establish 2.4GHz and 5GHz networks. The theoretically maximum possible transmission speed is up to 1,733 Mbit/s on the 5GHz connection. With MU-MIMO support, several clients can be supplied simultaneously to receive the maximum available bandwidth as needed.

The powerful Intel Wireless AC-8265 WLAN card was used for the performance test. The transmission speed was determined by transmitting a file over a NAS. The distance from the router to the clients is 2 meters. In the 2.4 GHz network, a maximum transmission speed of 30 MB/s was measured. In the 5 GHz network, 95 MB/s was achieved.
Wi-Fi range is, of course, also important. Compared with other Wi-Fi routers, the range is top-tier and can cover a three-storey house. To extend coverage, the FRITZ! WLAN Repeater 1750E is recommended, which is included directly in the mesh set. AVM has designed the process of setting up a dense mesh network to be user-friendly. Plug in the repeater, pair it with the router, and a mesh is automatically established. Within the mesh network, handover between nodes works seamlessly, so no connection gaps occur.
DSL
For the first time, the DSL modem of the FRITZ!Box 7590 supports 300 Mbit Supervectoring VDSL connections. Due to the lack of a high-performance DSL connection, the FRITZ!Box could only be tested on a DSL 16,000 connection. There, the maximum performance the line allowed was easily achieved. No stability problems occurred.

NAS
Worth mentioning is also the NAS function of the FRITZ!Box. Storage media can be connected to the router via USB 3.0. The write speed measured in the test with a FAT32-formatted USB stick was a moderate 20 MB/s. The read speed reached a maximum of 23 MB/s. The FRITZ! NAS thus does not deliver an outstanding performance. The management interface of the NAS is again well implemented. Access to connected storage media is completely uncomplicated with just one click via the browser.
Power consumption
Finally, power consumption. In idle mode, consumption is approx. 10 watts. Under higher load, consumption easily rises to 12 watts. Quite respectable values!
Our verdict
You can't go wrong with the FRITZ!Box Mesh Set. Excluding the slow transfer speeds of the USB 3.0 ports, the FRITZ!Box 7590 offers a complete package of performant hardware and a feature-rich user interface.
Particularly interesting is the AVM mesh, which is easy to set up and extend. This ensures that Wi-Fi reaches every corner without issue!
Specifications
General
- FRITZ!Box 7590
Hardware
- CPU
- AnyWAN GRX550
- RAM
- 512MB
- NAND
- 512MB
Ports
- 1x DSL
- 4x Gigabit Ethernet
- 1x Gigabit WAN
- 2x USB 3.0
- 2x a/b-ports
- 1x ISDN
Network
- 4 x 4 Wi-Fi AC + N with Multi-User MIMO
- 300 Mbit VDSL connections including Supervectoring
- Telephone system with DECT base
- 2.4 GHz WiFi
- up to 800Mbps
- 5G WiFi
- up to 1,733 Mbps
Other
- OS
- FRITZ!OS
- NAS
- External USB media
- Mesh
- Yes
- Power consumption
- 9-10 watts
- Size
- 250 x 48 x 184 mm
- Weight
- 522g
What’s included
1x FRITZ!Box 7590 1x FRITZ!WLAN Repeater 1750E 1x Power adapter 1x 4.25m DSL telephone connection cable 1x 4m DSL cable 1x 15m LAN cable 1x Installation manual 1x TAE-/RJ45 adapter 1x TAE-/RJ11 adapter
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 328,99 € | Go to store |
Price history
| Store | Price | Link |
|---|---|---|
| Amazon | 198,00 € | Go to store |





Comments