Contents
ORTUR Laser Master 2 PRO product details

Today we have another deal for the DIY enthusiasts among you. Specifically, it concerns the ORTUR Laser Master 2 PRO laser engraver, the successor to the particularly affordable and highly popular ORTUR Laser Master 2. ORTUR has extensively revised the new PRO model and added new features.
| Specifications | Laser Master 2 PRO | Laser Master 2 |
| Laser | LU2-4 LF/SF | LU10-A | LU2-2 | LU1-4 (LU1-3 / LU1-2) |
| Performance | 5.5W | 10W | 1.6W | 5.5W (4.5W / 1.6W) |
| Wavelength | 445 ± 5nm | 445 ± 5nm |
| Focus | Fixed | Fixed |
| Speed | up to 10,000 mm/s | up to 3,000 mm/s |
| Surface area | 400 x 400 mm | 400 x 430 mm |
| Motherboard | OLM-MAXUP-V10 | OLM-MAX-V10 |
| Firmware | OLF-V1.5 firmware | V1.40 series firmware |
| Safety |
1. Motion detection
2. Motor movement
3. UV protection
4. Smoke detector
5. Emergency stop
|
1. Motion detection
2. Motor movement
|
| Price | 335 Euro | 260 euros |
More security
Especially regarding safety, ORTUR has significantly improved things. An acrylic cover surrounding the laser module prevents the laser point from radiating to the sides. You should still not do without eye protection. With a laser power of up to 10 watts (40W power consumption), this laser engraver is no toy!

The new OLM-PRO-V10 motherboard (OLM-MAXUP-V10) meticulously monitors the engraving process and terminates it in the following situations:
- Movement: Strong vibrations or movements stop the engraving process.
- Crash: If an error occurs during data transmission (PC crash), the device shuts down.
- Motors: Once the motors remain stationary for a longer period, the laser switches off.
- Fire: If a fire occurs, a loud alarm sounds.
Also new is the red emergency stop switch, which stops the ORTUR Laser Master 2 PRO at the press of a button.

Photorealistic engraving
LU2-4 LF/SF
With a size of 0.17 x 0.25 mm (Long Focus) or 0.12 x 0.15 mm (Short Focus), the laser point of the ORTUR Laser Master 2 PRO is significantly smaller than that of comparable devices (0.23 x 0.23 mm). At the same time, the PWM control of the laser has been improved, allowing up to 1,000 shades of grey to be reproduced. The result is clean cuts up to 9 mm in softwood and photorealistic engravings on wood, plastic, leather and even anodised metals.

The difference between Long Focus (LF) and Short Focus (SF) relates to their respective intended uses. The SF module is better suited for cutting rather than engraving due to its small laser point. Conversely, the LF module is better suited for engraving due to its larger laser point.

LU2-10A
The new performance leader is the LU2-10A laser module, which generates a laser power of 10 watts with a power consumption of 40 watts. With its tiny 0.05 x 0.1 mm laser point, the laser engraver works at up to 15,000 mm / minute and cuts through 30 mm thick acrylic or 20 mm thick wood.
Engraving and cutting are achieved through the combination of two lasers, which each achieve a 5.5 watt laser power, resulting in a total of 10 watts of laser power.
LU2-2
The weakest model in the series in terms of power is the LU2-2, which is ideal for hobbyist engraving thanks to its small focal point of 0.07 x 0.06 mm and low 1.6-watt laser power.
Specifications
| Data | Brand: ORTUR Model: Laser Master 2 PRO Type: Laser engraving machine Material: Aluminium + powder-coated steel Laser: LU2-4 (4500 - 5500mw) Wavelength: 445 ± 5nm Focus: Fixed Speed: 0 - 10,000 mm/min Engraving area: 400 x 400 mm Motherboard: OLM-MAXUP-V10 with 32-bit MCU |
|---|---|
| Dimensions | Weight: 2.8kg Size: 60 x 57 x 14 cm |
ORTUR Laser Master 2 PRO reviews
German review, setup, tips & tricks
Play video on YouTubeEnglish review
Play video on YouTube




Comments
Comments are disabled for this post.