Contents
Saros 20 Flow Complete with new mopping roller
According to Roborock, the new flagship model Saros 20 Flow Complete delivers 36,000 Pa of suction power, enabling it to remove even deeply embedded dirt from high-pile carpets.
For navigation, Roborock combines its RetractSense LiDAR system with camera-based Reactive AI obstacle detection. According to the manufacturer, the robot can recognise more than 300 different objects and avoid them autonomously.

Roborock is placing particular emphasis on the mopping function of the Saros 20 Flow Complete. The new SpiraFlow 2.0 system uses a rotating mop roller that is pressed against the floor with 15 newtons of force and spins at up to 240 revolutions per minute. During cleaning, 16 water outlets continuously supply the roller with fresh water.
It is also designed to reach edges and corners more effectively. To do this, the robot has a moving side brush that adapts to the shape of the room and sweeps dirt from corners towards the suction channel.
After cleaning, the docking station takes care of most of the maintenance. The mop roller is cleaned there with hot water at up to 100 degrees Celsius. The cleaning agent is also dispensed automatically.
Saros 20 Neo overcomes thresholds up to 8.8 centimeters high
With the Saros 20 Neo, Roborock is targeting households in particular with complex floor plans and higher door thresholds.
The housing is just 7.95 centimeters high, allowing it to clean under lower furniture. More interesting, however, is the so-called AdaptiLift Chassis 3.0. According to the manufacturer, this allows the robot to overcome two-tier thresholds with a total height of up to 8.8 centimeters.

The Saros 20 Neo also delivers maximum suction power of 36,000 Pa. To prevent long hair from getting tangled, Roborock uses its Dual Anti-Tangle system. The DuoDivide main brush consists of two separate rollers, which are designed to move hair towards the centre before it is sucked up.
When mopping, the Saros 20 Neo uses warm water and a pressure of up to 14 newtons. The accompanying docking station then also cleans the mops with water heated to up to 100 degrees.
Battery life is also likely to be of interest in larger homes. Roborock specifies a maximum cleaning area of up to 350 square metres per run.
Saros-20 series receives ECARF certification
According to Roborock, the entire Saros 20 series has been certified allergy-friendly by the European Centre for Allergy Research Foundation (ECARF).
The ECARF seal is awarded to products and services that meet certain scientifically defined criteria for allergy sufferers. For robot vacuums, how effectively allergens are collected and retained in the device is particularly relevant.
Saros Rover is even designed to clean stairs
However, the most unusual device at the Roborock stand is the Saros Rover. The robot, which was unveiled earlier, is making its European debut at IFA.
Rather than relying solely on wheels, Roborock uses what it calls a wheel-leg architecture for the Rover. Its two legs can be raised and lowered independently. This is intended to allow the robot not only to move over larger obstacles, but also to climb slopes and make small jumps.

This is particularly interesting for multi-storey homes. According to Roborock, the Saros Rover can negotiate stairs and even clean them as it goes. This would eliminate a fundamental problem with conventional robot vacuums: users would no longer have to carry the device between floors.
For navigation, the rover combines motion sensors with spatial 3D data. Roborock describes it as the world’s first robot vacuum with a wheel-leg architecture.
However, it remains to be seen whether and when the technology will actually make its way into ordinary households.
Prices and launch date not yet known
Roborock has not yet provided specific pricing or release dates for the Saros 20 Flow Complete, Saros 20 Neo and Saros Rover at IFA. Details on availability are expected to be announced at launch.
Source: Roborock press release





Comments