Contents
Cleaning the floor, walls and waterline
Unlike basic pool-cleaning robots, which focus mainly on the bottom of the pool, the RockAqua P1 is designed to clean several areas of a pool automatically.
In addition to the floor, the robot also cleans the pool walls and the waterline, according to Roborock. It can also clean shallow areas and platforms, provided they are up to 15 centimeters below the water's surface.
This also makes the device suitable for more complex pools with different levels, transitions and steps.
Roborock uses adaptive navigation to find its way. This is complemented by image-based obstacle detection. This is intended to allow the robot to detect drain covers and steps, among other things, and adjust its route accordingly.
Up to 25,700 litres of water per hour
For cleaning, Roborock specifies a circulation or suction rate of around 25,700 liters per hour.
It is designed to collect both fine dirt and sand, as well as larger debris such as leaves. The dirt is collected in a four-litre container.
The RockAqua P1 uses a two-stage filtration system. According to the manufacturer, the filters are designed for particle sizes of up to 180 and 70 micrometres, respectively.
The robot can adjust its suction power based on the dirt it detects. When the device encounters larger accumulations of dirt, it changes its power to avoid unnecessarily stirring up particles as much as possible.
Camera is designed to detect more heavily soiled areas
Roborock also integrates a feature for specifically identifying dirtier areas of the pool under the name “ClearVision Smart Patrol Cleaning”.
The robot is designed to identify such areas independently and prioritise them during cleaning. This brings a principle now used by many robot vacuums to pool care. Rather than simply following fixed routes, the device is meant to adapt its cleaning strategy to the actual dirt.
Up to 3.5 hours of battery life
When cleaning the floor, the RockAqua P1 offers a runtime of up to 3.5 hours, according to the manufacturer. This is intended to allow the model to clean even larger swimming pools in a single cycle.
An intelligent motor control system adjusts power consumption to the conditions in the pool and the amount of dirt detected.
Robot waits at the waterline after cleaning
Once cleaning is complete or the battery level falls below a certain threshold, the RockAqua P1 returns to the waterline on its own.
There, the robot waits to be removed from the pool. A quick-drain function allows most of the water inside the device to drain before it is lifted completely out of the pool. This is intended to reduce its weight, especially when taking it out.
An app lets you check the pool robot’s status. You can also use it to configure cleaning routines and tailor them to your pool.
Roborock explores new markets beyond robot vacuum cleaners
Roborock has not yet announced a price or a specific release date for the RockAqua P1 at IFA. Further information on availability is not expected until the product launches.
Source: Roborock press release








Comments