Contents
First impressions of the B6AC V2
The box of the B6AC V2 is packed with information, already whetting the appetite for unboxing. The contents included, alongside the charger, numerous connection cables with alligator clips, XT60, Futaba and JST connectors. A adapter cable with banana plugs was also included. Naturally, a power cord and an English-language manual were also supplied.
Play video on YouTubeThe charger's build quality is good. The casing is made entirely of aluminium and is very detailedly labelled. Where everything is located and what the device can ultimately do is already printed on the casing. The integrated LCD display has a backlight and is easy to read.
On the left side of the housing are an AC input (240V 50/60 Hz), a DC input (11-18V), a micro USB socket, which allows the B6AC V2 to be connected to a PC, and a connection for a temperature sensor, which is not included in the scope of delivery. The WiFi module is also not included, which allows the charger to be controlled via a suitable app.
On the right side of the housing are the balance sockets (up to 6 cells) and the charging output. On the back, the SkyRC certificate of authenticity has also been attached in version 2, which can be revealed by scratching off a section underneath. Using the revealed number, the authenticity of the device can then be verified on the manufacturer's website. This verification should definitely be carried out, as numerous counterfeits of the previous model are already in circulation. However, to date, no counterfeits of version 2 are known.
Commissioning and features
The SkyRC charger can be powered via the AC or DC input. Thus, the SkyRC B6AC V2, for example, can be operated directly with an 11-18V battery that you may have previously used in your quadcopter.
I would like to describe the charging process in more detail using my Cheerson CX-20 LiPo with 11.1V and 2.7A. Before connecting the charger to the power supply, the battery should already be connected. To do this, connect the balance lead to the balance socket and, using the suitable adapter cable, connect the charging cable to the XT60 connector of the LiPo. In any case, you should first connect the adapter cable to the charger and only then connect the battery. Otherwise, there is a risk of a short circuit.
If the battery is switched on and the charger is connected to a power source, we can select or adjust our desired configuration via the display and menu buttons. The B6AC V2 can charge LiPo / LiFe / LiIon batteries with 1-6 cells, NiMH / NiCd batteries with 1-15 cells and lead-acid batteries with 2-20V. It charges at 0.1-6.0A and discharges at 0.1-2.0A.
Before selecting the appropriate battery type, we can make various settings in the system settings. Among other things, the following can be set here: a safety timer, a capacity cut-off, a temperature cut-off, the temperature unit, the rest time, the NiMH / NiCd sensitivity, the sounds and an input power low cut-off. Additionally, the firmware and hardware version as well as the serial number can be displayed.
In addition to the charging function, there is also a charge status display that allows you to view the voltage of individual cells, you can perform a resistance measurement of the battery and create custom charging profiles.
Once the correct battery type has been selected in the start menu, in my case “LiPo”, various modes can then be chosen.
Balance charge
In this mode, the voltage of the individual cells is adjusted during charging.
Charge
The charger charges the individual cells up to the specified voltage and then maintains them at the constant voltage.
Fast Charge
In this mode, the cells are only charged up to a set voltage. The constant voltage is not maintained, which is why the battery is usually only charged to 80%.
Storage
The battery cells are charged/discharged to the optimal voltage for storage.
Discharge
Cell discharging
For the other battery types, there are correspondingly adapted modes. For NiMH and NiCd batteries, these are Charge, Auto Charge, Discharge, Re-Peak and Cycle. For lead-acid batteries, there are the Charge and Discharge modes.
I tested the individual LiPo modes using the standard Cheerson CX-20 LiPo. The balance mode works as expected and is accurate. For independent verification, you can use a LiPo checker or measure with a multimeter at the balance plug. The storage mode also works precisely, and the B6AC successfully discharges and charges as desired.
Software
For those who want to operate the SkyRC IMAX B6AC V2 via PC, the manufacturer provides the so-called “Charger Master” software on the official website. The B6AC V2 can then be configured at will via a graphical user interface. The configuration options are identical to those that can be selected directly on the device. Firmware updates can also be installed on the B6AC V2 via the software.
Our verdict
The SKYRC IMAX B6AC V2 charger is an affordable charger that allows users to safely charge their lithium, nickel and lead-acid batteries. The build quality is good, and the package includes numerous adapter cables. Usability is simple and understandable even for laypeople. The "Charger Master" software is an interesting additional feature that puts the final polish on the charger.
Specifications
General
- AC input
- 100–240 volts
- DC input
- 11-18 volts
- Performance
- 50W
- Charge
- 0.1-6.0A
- Discharge
- 0.1-2.0A
- NiCd/NiMH batteries
- 1-15 cells
- LiPo/LiFe/Li-ion batteries
- 1-6 cells
- Lead-acid batteries
- 2-20V
- Weight
- 575g
- Size
- 135x144x36mm
What’s included
1x B6AC V2 charger 1x T-cable with banana plugs 1x DC cable with crocodile clips 1x T-cable with crocodile clips 1x T-cable with Futaba socket 1x T-cable with JST socket 1x T-cable with XT60 socket 1x instruction manual
Price comparison
| Store | Price | Link |
|---|---|---|
| Banggood | 41,86 € | Go to store |
Price history
| Store | Price | Link |
|---|---|---|
| Amazon | 32,99 € | Go to store |














Comments (4)
When I read something like this: “You should always connect the adapter cable to the battery first and only then plug the banana plugs into the charging socket. Otherwise, there is a risk of a short circuit,” I get goosebumps!! Surely that can’t be right!??? Or what is meant by that? Can it really happen that easily?
Hi Andreas, thanks for the tip. That is obviously poorly worded, and I will correct the mistake as soon as possible! I actually meant that you should first connect the adapter cable to the charger, then clamp the battery, and only then switch on the charger. If you connect the battery to the adapter cable first, the two banana plugs can quickly touch, resulting in a short circuit.
Yes, that can happen. Of course, it is good to know that such articles are also well read and lead to corrections.
If I understand correctly, it should turn on the charger first and wait ten seconds for everything to stabilise, then you can connect the battery to the charger, am I correct?