Contents
TenFifteen F3
Design
The design of the TenFifteen F3 features a mix of outdoor and sports smartwatch. With a thickness of 15.6 mm, the deep black watch case is anything but subtle. The pronounced thickness is explained by the fact that the manufacturer has not integrated all the antennas (GPS / Wi-Fi) into the watch strap, but has housed them directly in the smartwatch case. This means the watch strap can be exchanged at will. The watch strap already attached to the smartwatch is made of silicone, is size-adjustable and is closed with a tang buckle.

According to IP67 protection rating, the smartwatch is dustproof and protected against temporary immersion. Although the manufacturer advertises that you can swim with the smartwatch, it is not recommended. Temporary immersion means protection against water ingress at a depth of up to one metre for up to 30 minutes. The movements caused by swimming result in a changed water pressure, which is not considered by the IP certification!

A distinctive design feature is the four control buttons located on the watch case. Different functions can be triggered by pressing them. Above each control button is a prominent label explaining the respective function (COMP, HEALTH, START, BACK). Unlike many smartwatches from China, the TenFifteen F3 does not have a removable back. The SIM card is instead inserted via a SIM slot on the edge of the case. The 4-pin charging port and the heart rate sensor are also located on the back.
Display
The smartwatch features a circular 1.39-inch display of the OLED type. The display resolution is 400 x 400 pixels. The resulting pixel density is a sharp 286 PPI. Unlike LCD panels, OLED panels operate entirely without a backlight. Each individual pixel emits light on its own and can be switched off when required. This results in particularly deep blacks and a (usually) lower energy consumption.

Processor and memory
The processor of the TenFifteen F3 is the MediaTek MTK6580, used in 90% of current Chinese smartwatches. This is a quad-core processor whose Cortex-A7 cores run at up to 1.3 GHz. The RAM, at just 1GB, is somewhat lower than in comparable models released recently (usually 2GB), but experience shows it is sufficient for largely smooth multitasking. The internal flash storage has a capacity of 16GB. Additional expansion of internal storage via an SD memory card is not possible. The system is powered by a 550 mAh battery, making a battery life of 1 to 1 1/2 days appear realistic.

Native Android and features
Instead of a proprietary operating system, TenFifteen uses an open Android 5.1. The user interface has been adapted to fit the circular display of the TenFifteen F3. Apps can be downloaded and installed directly via the pre-installed Google PlayStore. A separate connection to a mobile device is not necessary, as the smartwatch has its own Wi-Fi module. In this sense, the F3 is a "smartphone for the wrist".
Among other things, it is possible to make calls and surf the internet with the smartwatch via the usable SIM card (2G and 3G), or to forward calls from the connected mobile device to the watch via Bluetooth (V4.0), receive notifications, or navigate via the integrated GPS module. Sports functions are naturally also available. The TenFifteen F3 features a step counter that records movement data, as well as a heart rate sensor that monitors heart rate. Various sports programs are available to choose from. Additionally, the smartwatch can be used as a sleep monitor. Music can be streamed from the mobile device to the smartwatch via Bluetooth and controlled there.

Initial Assessment
Chinese smartwatches have seen little progress in recent months. Many of the recently released models, including the TenFifteen F3, still rely on a somewhat older MediaTek processor configuration that certainly serves its purpose but has essentially remained stagnant, particularly in relation to Android OS. Android is now at version 8, which means the Android 5.1 used here can certainly be considered outdated. If you are currently considering buying a smartwatch from China, it is advisable to make your choice based purely on design and support within the smartwatch community, because, at least in terms of hardware and software, many of the models found under different names have hardly any noteworthy differences.
Specifications
Display
- Display type
- OLED
- Display size
- 1.39 inches
- Display resolution
- 400 x 400 pixels
Processor and memory
- CPU
- MTK6580
- RAM
- 1GB
- Internal storage
- 16GB
- Storage expansion
- No
Mobile network
- GSM
- 850/900/1800/1900MHz
- WCDMA
- 850/1900/2100MHz
Other
- Bluetooth
- 4.0
- Wi-Fi
- 802.11 b/g/n
- GPS
- Yes
- Pedometer
- Yes
- Heart rate monitor
- Yes
- OS
- Android 5.1
- Battery
- 550mAh





Comments