Contents
Mobvoi TicWatch Pro 3
Snapdragon Wear 4100
In terms of hardware, Wear OS-based smartwatches have effectively been stuck in 2011. The last Snapdragon Wear 3100 was only introduced in late 2018, but the smartwatch processor did not bring any technological progress. All Snapdragon Wear processors released to date were based on ancient Cortex-A7 cores, which were first introduced in 2011. With the new Snapdragon Wear 4100 processor series, Qualcomm breaks away from the old architecture.

The Snapdragon Wear 4100 works with its four Cortex-A53 cores significantly faster and more efficiently. Compared to the old Cortex-A7 cores, the manufacturing process was reduced from 28nm to 12nm and the clock speed increased from 1.1 GHz to 1.7 GHz. According to Qualcomm, this results in a performance increase of 85 percent and a power consumption reduction of 25 percent. Also new is the system-on-chip's graphics unit, which is an Adreno 504 GPU. According to Qualcomm, performance here has increased by a factor of 2.5.
Testing will have to show how much faster Wear OS runs on the new TicWatch Pro 3. The processor is supported by 1GB RAM and 8GB storage. It is not possible to expand the storage further with an SD memory card. This model also lacks cellular connectivity.
Dual-Layer Display 2.0
A special feature of the recently released TicWatch models and the new TicWatch Pro 3 is the improved Dual-Layer Display 2.0. It features a 1.4-inch AMOLED display with a resolution of 454 x 454 pixels. As a Retina display, it boasts a particularly high pixel density, so individual pixels are not visible at a typical viewing distance. Another display, located invisibly above the AMOLED panel, is the power-friendly TN display.

The monochrome display serves as an all-day dynamic time display and provides an overview of essential data, such as daily steps. In so-called "Smart Mode", where the AMOLED display is active, battery life is approximately 3 days. The "Essential Mode", which uses the TN display, enables battery life of up to 45 days.
Premium look
Mobvoi itself describes the design of the TicWatch Pro 3 GPS as "Premium industrial design". The bezel is made of stainless steel, which not only looks great but also appears robust. Compared to the TicWatch Pro, the housing has shrunk by 9 percent in thickness (47 x 48 x 12.2mm) and is 28 percent lighter (41.9g), despite having a higher battery capacity (595 mAh). If you are not satisfied with the standard silicone watch strap, you can replace it with a standard 22mm strap. According to IP68 protection rating, the housing is protected against water. Showering or swimming is no problem with the TicWatch Pro 3.

Sports, calls and NFC
On the software side, the TicWatch Pro 3 GPS offers extensive application possibilities. In everyday life, the smartwatch monitors the wearer's health by performing regular heart rate measurements and determining the blood oxygen saturation (SpO2). For sporty users, Mobvoi provides various sport programmes that comprehensively track activities. For precise data collection, the smartwatch has integrated numerous sensors. These include a barometer, a GNSS module (GPS, GLONASS, Galileo, BeiDou), a gyroscope and an accelerometer. The synchronisation of the collected data is done via the Mobvoi App. Via this, the user has the option to display all data in a clear and graphically arranged manner.

The Wear OS operating system allows the installation of further apps. Want to use Spotify or WhatsApp directly via the smartwatch? No problem! Watchfaces can be exchanged freely and customised individually. Thanks to the integration of a microphone and a speaker, calls can be made directly via the smartwatch, without having to take the smartphone out of your trouser pocket. NFC enables the use of Google Pay, allowing you to pay contactlessly and therefore particularly conveniently.

Source: mobvoi.com/ge/pages/ticwatchpro3gps
Price and availability
The TicWatch Pro 3 GPS smartwatch is available immediately. On Amazon, the smartwatch is listed for €299.99. The availability date there is given as 30 September.





Comments (5)
Many thanks for the informative article. I am inclined to buy the smartwatch, but would also like to wait for your review. When can we expect it?
Hi Seb, so far I cannot say exactly whether a review will be published.
Hi Timo, are there any updates on the review?
Hello, what are the differences from the predecessor model? As far as I can tell, they have simply installed the new Wear chip!?
Hi Patrick, first there are small differences in the design. The TicWatch Pro 3 has become slimmer and lighter. Then there are differences in the display. 1.4 inches instead of 1.39 inches and a higher resolution of 454 x 454 pixels instead of 400 x 400 pixels. The dual-display technology has also been improved.
As you already mentioned, the new Snapdragon Wear 4100 has been installed. It is faster and more power-efficient. So the battery lasts a bit longer. SpO2 measurement is also new. The predecessor couldn't do that yet.
I hope I have given you a brief overview.