Contents
Test: BALMUDA Rain
Especially in winter, many households struggle with dry heating air. This often causes humidity levels in the room to drop below 30 percent, which in turn leads to dry mucous membranes and promotes colds. The optimal humidity level in living spaces should be between 40-50 percent. To achieve such levels, a humidifier such as the BALMUDA Rain is recommended.
Modern design
When hearing the word "humidifier", most people will likely think of one of those compact ultrasonic humidifiers. The Rain is quite different; with dimensions of 35 x 35 x 37.4 cm and a weight of a substantial 5.7kg, it is anything but compact.
The design of the Rain is similarly distinctive. BALMUDA draws a comparison to an elegant vase. Visitors who were able to examine the Rain over the past few weeks saw it as a bulky object, an urn, but indeed also as a vase. However, design is a matter of taste, so I will not go into further detail here. Many people like the design of the Rain, many do not.
It can be said, however, that the design is indeed well thought out. There are no hard-to-reach corners due to the round shape, so stubborn dirt cannot accumulate.
The BALMUDA Rain in everyday use
Assembly and filling of the Rain
Taken out of the box, the Rain is ready for use in no time. The upper control unit with the display and control ring can be removed from the lower water tank with filtration system simply by lifting it. The instructions explain in detail how to assemble the filters. The Rain should be placed at a lateral distance of 30cm and an upper distance of 120cm from walls and objects.

The BALMUDA Rain is filled directly via its slightly curved top. Pour water in as you would a vase, and you’re done! The small display below the top provides information about the fill level. The container has a capacity of 5 litres of water. Oils and other additives are strictly forbidden! The use of distilled water is not necessarily required. In long-term testing, using tap water yielded no disadvantages. However, one should keep an eye on the local water hardness. If there is no water in the Rain, or if the water level is running low, the humidifier switches off automatically.

Operating the Rain
Operation is via turning and clicking the control ring on the top. The OLED display located centrally on the top provides information about the operating status. The water level, current room humidity, operating mode and air volume level are displayed clearly. The operating modes are divided into an automatic mode, which maintains the humidity level between 40 and 60 per cent depending on the setting, and a manual mode, which controls the room humidity across a total of five air volume levels. An additional 24-hour timer with 1-hour increments can be programmed.

The power button and a 24h timer button above it are located on the back of the Rain. Pressing and holding the power button for 2 seconds while the device is on activates the child lock, which blocks input. All inputs are confirmed by an operation tone. In the settings, display brightness and speaker volume can be adjusted, among other things. The display automatically dims when not in use.
Operation and volume of the Rain
The BALMUDA Rain is particularly suitable for large living areas. With up to 600 ml/h (level 5), the device maintains the humidity in the room. Humidification is achieved through a natural and particularly energy-efficient evaporation process.
During testing, the Rain was put through its paces in a 40m² room with 35% humidity. In automatic mode, with a preset 50% humidity level, it takes approximately 30 minutes to reach 50% humidity. The Rain quickly switches to operating level 4, which is clearly audible. At operating levels 1-2, the humidifier is barely audible. From operating level 3 onwards, the operating noise increases significantly. Continuous operation at levels 4 and 5 can certainly be perceived as annoying!

According to BALMUDA, energy consumption is between 2 and 23 watts. This roughly corresponds to the values recorded during testing. In the standby mode 3 watts, level 1 consumed a low 5 watts, and level 5 consumed only 26 watts.
Rain filter system and cleaning
BALMUDA recommends replacing the main filter every 6 months. Replacement filters cost around €45. During operation, the Rain informs you when cleaning is due, which should be performed monthly depending on usage intensity. Incidentally, no unpleasant odours occurred during long-term testing.
The cleaning of the main filter can be done completely uncomplicatedly with warm water, citric acid and baking soda / washing soda. The enzyme pre-filter is cleaned simply by vacuuming with the vacuum cleaner. The silver ion cartridge is rinsed off under running water.
Our verdict
The BALMUDA Rain is a premium humidifier. The design is modern, handling is extremely easy, and performance is impressive. Additionally, its extremely low energy consumption means no tears during continuous operation. However, the operating noise is criticised, increasing significantly from level 3 and being perceived as unpleasant at the highest level, 5.
However, those who are not deterred by the high purchase price of the Rain will receive a highly interesting humidifier that copes very well with large rooms and, thanks to its sophisticated filter system, not only humidifies the air but also keeps it clean.
Specifications
Performance
- Air volume
- 150 - 600 ml/h
- Operating modes
- 5
- Operating noise
- 6 - 42 dB
- Water tank capacity
- 4.2 l
- Humidification duration
- 6–25 hours
General
- Power consumption
- 2 - 23 W (*2)
- Size
- 350 x 350 x 374 mm
- Weight
- 5.7 kg (10 kg when filled)





Comments