Contents
Independent power has long been a bottleneck for mobile adventurers. Conventional 12V cigarette lighter sockets often deliver too little power, so charging on the go usually means using the alternator while driving or solar panels when stationary.
The new BLUETTI Charger 2 breaks through this limitation and, as the industry's first device, introduces dual charging technology that uses both power sources simultaneously.
13 times faster than conventional chargers
The Charger 2 combines both power sources, enabling a combined input of up to 1,200 W. This consists of up to 800 W from the vehicle's alternator and up to 600 W from solar panels (limited to a total of 1,200 W).
According to BLUETTI, this charging speed is 13 times faster than that of standard car chargers. Power stations can therefore be charged quickly while driving or parked, drastically reducing dependence on stationary power sources.
Intelligent power management and "Battery Link"
In addition to functioning as a charger, the Charger 2 also acts as a central gateway for vehicle energy management. The so-called "Battery Link" mode can manage multiple BLUETTI power stations.
There is also a reverse charging function (Reverse Charge), which allows the Charger 2 to charge and maintain the vehicle’s starter battery using the connected power station. It includes three modes:
- Emergency Jump Start: Quickly charge a flat starter battery so you can start the engine.
- Trickle charging: Low-current maintenance charging for parked vehicles.
- Pulse Maintenance: Pulsed currents to maintain the battery and extend its service life.
Easy installation and upgrade path
The Charger 2 is designed as a user-friendly "plug-and-play" solution and is particularly suitable for larger vehicles such as SUVs, trucks, camper vans and motorhomes.
The switch to the Charger 2 is also designed to be very straightforward for owners of the previous model (Charger 1). As the wiring infrastructure remains in place, the device can simply be swapped out without rewiring.
Technical specifications and app control
The device measures a compact 265 x 169 x 69.7 mm and weighs just 1.59 kg. It is designed for ambient temperatures from -20°C to 60°C and has an IP20 protection rating. The BLUETTI app (Bluetooth & Wi-Fi) provides full visibility of energy flows, remote control, historical data and CO2 savings.
The Charger 2 can optionally be expanded with the Hub D1 to provide intelligent DC power for 12V/24V devices, delivering up to 700 W through an Anderson port.
Availability
The BLUETTI Charger 2 will be available from January 7, 2026 at the BLUETTI Store. To mark its launch, BLUETTI is offering special early-bird deals and upgrade prices for existing customers. Use the code TVCharger2 to get an additional 6% off at checkout.
- Charger 2 with DC cable for 399 euros instead of 599 euros (RRP) (valid until February 7)
- Charger 2 without DC cable (for Charger 1 customers) for 99 euros instead of 149 euros (valid until 06 February)
Source: BLUETTI








Comments