Contents
JIMMY Matrix M9 Pro: From standalone appliance to modular system
The Matrix M9 Pro has a removable raw-water tank, filters tap water by reverse osmosis and then dispenses it either at room temperature or heated. We already know the same principle from the JIMMY R9 Pro, which we tested a few months ago.
The key difference is on the side of the device. Additional modules can be connected via the so-called AquaLink system. At present, the main option is the S9 for chilled sparkling water. An ice cube module, the I9, is also planned.

The main advantage is that you can configure the system to suit your needs. If you only want filtered and hot water, stick with the M9 Pro. If you later want sparkling water as well, add the S9.
However, the whole setup requires a fair amount of space. The M9 Pro measures 278 x 310 x 366 millimetres. The S9 adds another 198 millimetres in width. Together, the combination takes up just under 48 centimetres. That is considerably more space than a traditional water carbonator or a single countertop filter.
So while modular means flexible here, it certainly does not mean compact.

Design and build quality
We generally like the look of the Matrix system. JIMMY continues to use a modern, largely enclosed casing and a neat front.
In a direct comparison, however, we found the R9 Pro's control panel somewhat better designed. Its icons were more understated, giving it a slightly more stylish overall appearance. The M9 Pro is by no means difficult to navigate, but its user interface feels a little more functional.

Otherwise, the system feels solid and well made. The M9 Pro weighs 7.5 kilograms, and the S9 adds another 3.33 kilograms. Once assembled, the combination sits firmly on the countertop.
No connection to a water supply is needed. Simply set up the M9 Pro, fill its removable 5-liter raw water tank with tap water, and plug the device in.
Matrix M9 Pro filter system
JIMMY has also stuck with its existing filter system. It advertises seven-stage water treatment, with the stages distributed across three cartridges.
The system uses:
- an M2S composite filter with an expected lifespan of around twelve months
- a Q2S mineralisation filter with a lifespan of around twelve months as well
- a RO-2.0S reverse osmosis membrane for up to 24 months

The composite filter first captures larger particles and substances such as chlorine, as well as unpleasant odours. The reverse osmosis membrane then removes a large proportion of dissolved substances from the water.
JIMMY claims to remove up to 99.99 percent of certain contaminants, including heavy metals, PFAS and chlorine. After reverse osmosis comes remineralization. This is intended to restore minerals to the largely demineralized water while also rounding out its taste. Compared with tap water, the filtered water tastes noticeably softer and more neutral.

UV-C and TDS display
For added hygiene, JIMMY uses UV-C light. This is designed to prevent the already purified water from becoming contaminated with germs while sitting in the system for extended periods.

The M9 Pro also monitors the TDS value of the raw water and filtered water.
TDS stands for “Total Dissolved Solids”, meaning the total amount of dissolved substances in water. The figure does not directly indicate whether water is healthy or unhealthy, but with a reverse osmosis system it is a useful way to track how much the membrane reduces dissolved substances.
5-litre tank and 3:1 wastewater ratio
The clean water tank holds 5 litres and can be removed from the device completely for filling.

As with any reverse osmosis process, filtration produces a concentrate in which the retained substances collect. According to the manufacturer, the M9 Pro achieves a 3:1 ratio of purified water to concentrate.
That is a good figure for a countertop appliance. The concentrate is not discharged directly into a drain. As a result, the appliance does not need a fixed water connection. Instead, the more concentrated water remains in the raw water tank, which must be emptied and refilled with fresh water regularly.
Hot water in just a few seconds
The Matrix M9 Pro retains one of the R9's most practical features: the integrated instant water heater.
With 2,200 watts of power, it heats only the amount of water actually dispensed. In other words, there is no need to keep an entire tank warm all the time.
There are seven temperature settings: room temperature, 45, 55, 65, 75, 85 and 98 °C. The amount of water can be set to 60, 150, 240 or 450 milliliters.

In practice, this combination remains a major convenience. For example, you can select 85 or 98 °C for tea, while 45 °C is useful for preparing baby food, among other things.
The water is ready in just a few seconds. In many households, the M9 Pro can genuinely replace a separate kettle.
Matrix S9: sparkling water as an add-on module
The new Matrix concept gets more interesting with the S9. Measuring 198 x 310 x 402 millimeters, this add-on unit connects to the M9 Pro via AquaLink and cannot be operated independently. The water it needs comes directly from the M9 Pro's filter system.

Instead of carbonating tap water with a separate Sodastream, already filtered and remineralized water goes straight into the carbonator, which has a 0.75-liter cold water tank on hand.
JIMMY specifies a target temperature of 10 to 15 °C. This also matches our experience quite well: the water is pleasantly cool, but not truly ice-cold like water from the refrigerator.
Carbonation: SodaStream is fizzier
The S9 carbonates water reliably, but it takes a little longer than a Sodastream, for example, to achieve the same level of carbonation.
With three bursts, the result is roughly in the “medium” range. Those who prefer strongly carbonated classic sparkling water will need closer to six bursts. We get comparable results faster with a Sodastream.
The CO₂ compatibility is a positive, by contrast. JIMMY does not use unusual proprietary cartridges, but supports standard threaded CO₂ cylinders. These cartridges are available in many supermarkets, chemists and drinks shops.

According to JIMMY, one cylinder is enough for up to 60 litres of sparkling water. As always, the actual amount depends largely on how fizzy you like it.
Two drinking bottles included
The S9 comes with two reusable plastic bottles, each with a capacity of 500 milliliters.

However, care is needed when cleaning them. The plastic bottles are not heat-resistant and should therefore never be cleaned with boiling water.
Very hot water can warp or damage the plastic. For regular cleaning, warm water and a little dish soap are more than enough. Replacement bottles are available from the JIMMY online store for an RRP of 29.99 euros.
Our verdict
An osmosis filter on its own would be nothing special by now; instead, the Matrix M9 Pro is made interesting by its modular design. The S9 adds sparkling water, and the system can later even be expanded with an ice maker.
In everyday use, it’s particularly pleasing that everything works without a permanent water connection and that standard CO₂ screw-in cylinders can be used. The downside is that the combination takes up quite a lot of worktop space. The S9 could also be a little more powerful when carbonating, and 10 to 15 degrees is cool, but not exactly ice-cold.
If you already drink filtered water and also use a sparkling water maker, the Matrix system lets you sensibly combine two appliances. If you only want hot and cold water, however, you don't necessarily need the modular design and should consider the R9 Pro or R9.
Specifications
General
- Type
- Modular reverse-osmosis water purifier with hot water and sparkling water functions
- System
- JIMMY AquaLink
- Heating power
- 2200 W
- S9 cooling performance
- 100 W
- Purified water-to-wastewater ratio
- 3:1
- M9 Pro water temperatures
- Ambient / 45 °C / 55 °C / 65 °C / 75 °C / 85 °C / 98 °C
- S9 cold water temperature
- approx. 10–15 °C
- M9 Pro dispensing quantities
- 60 / 150 / 240 / 450 ml
- UV sterilization
- Yes
- Touchscreen
- Yes (LED)
- TDS measurement
- Yes
- M9 Pro dimensions
- 278 × 310 × 366 mm
- M9 Pro weight
- 7.5 kg
- S9 dimensions
- 198 × 310 × 402 mm
- S9 weight
- 3.33 kg
- Overall width M9 Pro + S9
- approx. 476 mm
Water tanks
- M9 Pro clean water tank
- 5 litres
- Clean water tank
- 1 liter
- Tank design
- removable
- S9 cold water tank
- 0.75 litres
- Sparkling water bottles
- 2 × 0.5 liters, BPA-free
Cleaning system
- Levels
- 7-stage filtration
- Filter types & lifespan
- – Composite filter (M2S)
- 12 months
- – Mineralisation filter (Q2S)
- 12 months
- – RO membrane filter (RO-2.0S)
- 24 months
Hot water function
- Heating type
- Instantaneous water heater
- Heating time
- approx. 3 seconds
- Temperature settings
- Room temperature / 45 / 55 / 65 / 75 / 85 / 98 °C
- Dispensing volumes
- 60 / 150 / 240 / 450 ml
Cold water and sparkling water functions
- Module
- JIMMY Matrix S9
- Cold water tank
- 0.75 litres
- Cold water temperature
- approx. 10–15 °C
- Sparkling water bottles
- 2 × 0.5 liters
- CO₂ system
- Standard screw-in cylinder
- CO₂ cylinder included
- No
- Range per CO₂ cylinder
- up to 60 liters according to the manufacturer
- Operation without M9 Pro
- No
- System connection
- AquaLink
M9 Pro electrical specifications
- Tension
- 220–230 V ~ 50–60 Hz
- Rated power
- 2200 W
S9 electrical specifications
- Rated power
- 100 W
Compatibility
- M9 Pro
- AquaLink-compatible with S9 sparkling water module and I9 ice cube module
- S9
- usable only in conjunction with the JIMMY Matrix M9 Pro
What’s included
1 × JIMMY Matrix M9 Pro 1 × drip tray 1 × top cover 1 × raw water tank cover 1 × raw water tank 1 × M2S composite filter 1 × Q2S mineralisation filter 1 × RO-2.0S RO membrane filter 1 × user manual <b>Box contents S9</b> 1 × JIMMY Matrix S9 1 × CO₂ cylinder holder 2 × 0.5-litre sparkling water bottles 1 × drip tray 1 × user manual 1 × quick start guide CO₂ cylinder: not included
Price comparison
| Store | Price | Link |
|---|---|---|
| Amazon | 535,49 € | Go to store |










Comments