Contents
Robust design
The SwitchBot LockPro is greapartly made of aluminiummade of aluminium andd makes a high-quality entryfinish. This sets it apart from its predecessor, which was made entirely of plastic.

With AbMeasurements by 120 x 59 x 83.9 mm it is in thesame as othersSmart locks, howeveralso quite kpraised and expecteddefinit the dooriv.
On theFront bs located alarge knob, withof which theDoor can also be operated manually- and unlock lallows. In the Mthe centre of the button isone button intated, whichavailable with warrantyions such as On/To be booked lallows for. Very practiBrisk!

Installation: Simple, but with small pitfalls
Installing the SwitchBot Lock Pro is generally straightforward and works with almost every common locking system. The associated app provides a step-by-step guide with videos that takes you through the entire installation and setup process.

Everything seemed fine so far, or at least I thought so. Calibrating the lock took several attempts before everything worked flawlessly. The step for the door latch could have been explained more clearly, as it is not immediately obvious what the individual steps are for.
The positive aspect is that two different mounts are included. If the lock cylinder protrudes more than 3 mm, mount A can be attached without adhesive. Caution is needed when tightening the screws. Do not overtighten, otherwise it may jam later.

The optional keypad is also configured via the app. Users can choose to stick it on or screw it in place. To connect to the internet, you need the separately available SwitchBot Hub 2 or Hub Mini (*at Amazon). Unlike the Nuki Bridge, it does not plug directly into a socket but is powered via a cable.
All in all, the complete installation and setup of the SwitchBot Lock Pro took less than 20 minutes.

Quiet, comfortable and with many opening options
In operation, the SwitchBot Lock Pro works pleasingly quietly and reliably. From a few metres away, the motor is hardly audible. A clear plus over the predecessor, which still produced fairly loud opening noises. There were no unexpected failures during the test period.

The keypad features illumination and an additional "0" key, which is missing from the Nuki. The fingerprint sensor works reliably and the door can be opened with cards or NFC tags via NFC. One is included.

In total, the SwitchBot Lock Pro offers more than 9 different ways to open and close:
-
- Fingerprint (requires Keypad Touch)
- One-time, permanent, time-limited and virtual codes
- Remote unlocking via app
- Voice control via Siri, Alexa & Co.
- Apple Watch app
- Bluetooth
- NFC tags
- Physical remote control
- Conventional key
The SwitchBot app appears more orderly and well-thought-out overall than those of many other manufacturers. All settings and user management can be found quickly.
The included magnetic sensor is also practical, indicating in the app whether the door is open or closed. Push notifications when the door is opened or closed are sent directly to the smartphone.
Long battery life and Matter support
According to the manufacturer, the SwitchBot Lock Pro lasts up to 9 months without a battery change on four AA batteries. Alternatively, a rechargeable battery pack (*at Amazon) is available for 12 months of runtime. For comparison: the Nuki Smart Lock lasts only 6 months on four CR123A batteries.
Changing the batteries is easy thanks to the magnetic cover: pull off the lid, swap the batteries, done. If the battery level falls below 20%, you receive a notification via the app or email.

A major plus is Matter support via the separately available Hub Mini or Hub 2. This allows the SwitchBot Lock Pro to be integrated into all common smart home systems such as Apple HomeKit, Amazon Alexa or Google Home. Remote control is also possible then.
What the SwitchBot Lock Pro still lacks is a convenient auto-unlock feature for automatically unlocking when returning home. SwitchBot could certainly add this via an update. Apple Home Key for unlocking via iPhone or Apple Watch is also not supported. However, this technology is not yet widely used here.
Our verdict
The SwitchBot Lock Pro impressed me with its high-quality aluminium design and diverse unlocking options. Installation was easy thanks to the step-by-step instructions in the app, although calibrating the step involving the latch required some patience.
In daily use, it operates quietly and reliably. I particularly liked the many opening options, such as fingerprint and NFC, as well as the tidy app. Clear pluses are also the long (promised) battery life and Matter support.
There are minor deductions for the lack of an auto-unlock function and the previously mentioned slightly inaccurate calibration steps. Nevertheless, the SwitchBot Lock Pro is a strong upgrade over its predecessor and a worthwhile investment for any smart home.
Specifications
Installation
- Euro profiles with A and B mounts
Operation
- Power supply
- *Four AA batteries
- *1.5 V, 2900 mAh battery
- Runtime
- *9 months with batteries
- *12 months with battery pack
- Interior
- *10°C to 45°C
- *10% to 90% RH
Operation
- *Mechanical quick-release button
- *Indicator light (red, blue, green)
- *Summer
Connectivity
- Bluetooth Low Energy (BLE)
- *Range up to 120 m without obstacles
- *Range up to 20 m with app/keypad
Material, size and weight
- Material
- Aluminium-magnesium alloys, PC + ABS
- Size
- 120 × 59 × 83.9 mm
- Weight
- 435 g
Functions
- *Automatic locking and door opening
- *Matter and HomeKit support
- *Warning for low battery / batteries
- *Unlocking by code (time-based or one-time)
- *Unlocking via keypad
- *Unlocking via NFC
- *Unlocking via app
- *Unlocking via voice assistant
- *Notifications
Price comparison
| Store | Price | Link |
|---|











Comments