Skip to content

Vernee Mars Pro – mid-range smartphone

The “Vernee Mars Pro” is the successor to the “Vernee Mars,” a mid-range smartphone released at the end of 2016. In this article, we take a closer look at what’s new in the smartphone!

Vernee Mars Pro smartphone
Contents

Vernee Mars Pro

Vernee is a comparatively young smartphone manufacturer that introduced the Vernee Mars series in the mid-range segment only from the end of 2016, alongside the low-budget Vernee Thor models and the high-end Vernee Apollo series. The Vernee Mars Pro is the second mid-range smartphone in this series, which hardly shows any external innovations compared to its predecessor, but offers significantly improved hardware under the hood.

Design and display

The casing of the Vernee Mars Pro is made entirely of metal and achieves a thickness of just 0.76 cm. The dimensions are 15.10 x 7.40 x 0.76 cm with a lightweight 161g weight. The rounded casing edges and the so-called 2.5D curved glass ensure a more appealing look on the one hand, while also providing better haptics on the other. According to Vernee, the outer display bezel is just 1 mm. The display is manufactured by "Japan Display Inc." (JDI) and is a so-called In-Cell display with Touch and Display Driver Integration (TDDI). Such a display is characterized primarily by a thinner panel, lower production costs and better performance. The display has a resolution of 5.5 inches in Full HD (1920 x 1080 pixels). The panel is protected by Corning Gorilla Glass 3.

Vernee Mars Pro test

Processor and memory

MediaTek's mid-range SoC "Helio P25" is installed as a system-on-chip. A total of 2 clusters, each consisting of 4 ARM-A53 cores, ensure sufficiently fast and energy-efficient operation. The memory configuration consists of 6GB LPDDR4X RAM and a 64GB eMMC5.1 flash storage. Vernee hopes primarily to achieve better multitasking performance through the large, quickly connected RAM. The internal storage can additionally be expanded via a Micro SD card. Due to the so-called "hybrid slot", storage expansion is only possible at the expense of the dual-SIM function.

Vernee Mars Pro Review

Camera

Unlike most smartphones currently released, the Vernee Mars Pro uses a conventional single camera as its main camera rather than a dual-camera setup. The image sensor is a 13-megapixel Sony IMX258 image sensor, which was already used in the predecessor and is also found in numerous other Chinese smartphones, such as the Xiaomi Redmi 4 models. The main camera of the Vernee Mars was less convincing, despite the sensor having considerable potential. Whether the manufacturer has better optimised the Vernee Mars Pro's main camera via software remains to be seen. Supporting the main camera are a dual-tone LED flash and phase detection autofocus (PDAF). The front camera has a resolution of 5 megapixels. There are likely no differences from the predecessor here either.

Vernee Mars Pro review

Fingerprint sensor

The placement of the fingerprint sensor is particularly interesting. Usually, it is located either on the back of a smartphone or underneath the display. As was already the case with the Vernee Mars, the manufacturer has also placed the fingerprint sensor on the side of the frame in the Mars Pro. The contact surface is naturally much smaller as a result, but the predecessor already showed that the unusual placement of the fingerprint sensor does not negatively impact the recognition rate. Furthermore, Vernee promises unlock times of less than 0.1 seconds, 360° recognition and learning capability of the sensor.

Fingerprint scanner

Connectivity and battery

The Vernee Mars Pro is a dual-SIM smartphone and supports all the 2G, 3G and 4G frequency bands commonly used locally. Single-band WiFi with the protocols 802.11a/b/g/n and Bluetooth 4.0 are present. The sensor suite includes an ambient light sensor, an e-compass, a gravity sensor, a gyroscope, a Hall sensor and an accelerometer. Physical connectivity options comprise a USB-C port and a 3.5 mm audio jack. The battery has a capacity of 3500 mAh. The smartphone already runs Android 7.0 with the customised "VOS" user interface out of the box.

Battery

Specifications

Processor and memory
CPU
MediaTek Helio P25
GPU
Mali-T880
RAM
6 GB
Internal storage
64GB
Storage expansion
Yes
Display
Display type
In-Cell TDDI
Display size
5.5 inches
Display resolution
1920 x 1080 pixels
Screen protector
Corning Gorilla Glass 3
Cameras
Main camera
13MP
*Aperture
f/2.0
*PDAF
*Dual-tone LED flash
Front camera
5 megapixels
Mains
Dual SIM
Yes
SIM size
1x Nano SIM 1x Micro SIM
2G
GSM 850/900/1800MHz
3G
WCDMA 900/2100MHz
4G
FDD-LTE 800/1800/2100/2600 MHz
Wireless
Wi-Fi
802.11a/b/g/n/
Bluetooth
4.0
GPS
Yes
Sensors
*Hall sensor
*Gravity sensor
*Gyroscope
*Accelerometer
*Ambient light sensor
*Proximity sensor
*E-compass
*Fingerprint sensor
Battery
Battery
3,500 mAh
Connection
USB-C
Other
Operating system
Android 7 (VOS)
Size
15.10 x 7.40 x 0.76 cm
Weight
161g
Written by

Timo Altmeyer

Timo is the founder of techreviewer.de and a true technology expert. From smartphones to e-bikes, and from home cinema to smart homes, he always has his finger on the pulse of the latest trends.

To author profile →

Comments

Write a comment

By submitting, your name, email, and comment will be stored. Find out more in our Privacy Policy. We review comments with multiple links before approving them.

The techreviewer newsletter

The week’s top reviews, news, and deals – delivered straight to your inbox.