Contents
Compact design for greater versatility
One of the most striking innovations of the WINBOT MINI is its compact design. While the predecessor (our WINBOT W1 Pro review) with 27 cm side length and 7.75 cm height was still relatively large, ECOVACS now relies on a significantly slimmer design. This brings several advantages:
- Better for windows with grilles or handles: Due to its reduced height, the MINI can also clean windows that are difficult to access due to burglar protection grilles or handles.
- Ideal for small windows: Particularly in narrow corridors or hard-to-reach corners, the compact size plays to its strengths.
- More flexible than the predecessor: The WINBOT W1 Pro already had problems with certain window types – angled windows and very small glass surfaces were a challenge. The smaller size of the MINI could help here.

Technical improvements for more efficient cleaning
In addition to its compact design, the WINBOT MINI brings some technical upgrades intended to distinguish it from its predecessor.
Ultrasonic spray system with dual nozzles
The new ultrasonic spray system distributes a fine mist over the glass surface, which is intended to make cleaning more frugal in terms of water or cleaning agent usage. This was already one of the strengths of the WINBOT W1 Pro – the new dual-nozzle technology of the MINI could further enhance this effect.
WIN-SLAM 3.0 Navigation
The navigation has also been revamped. The robot uses the WIN-SLAM 3.0 system, which is designed to enable optimised route guidance with three cleaning modes (Fast Clean, Deep Clean and Spot Clean).
- Fast Clean – Quick cleaning for lightly soiled windows
- Deep Clean – Intensive cleaning for stubborn dirt
- Spot Clean – Focused cleaning for individual stains

Precise edge cleaning
One of the weaknesses of many window-cleaning robots is cleaning edges and corners. According to ECOVACS, the WINBOT MINI achieves a cleaning coverage of 99.5% and can even clean glass surfaces with edges only 2 mm wide. This would be a significant improvement over the WINBOT W1 Pro, which often left streaks at the window edges.
Safety and comfort features
Window cleaning robots must be particularly safe, as they operate vertically on glass surfaces. The WINBOT MINI relies on a 9-fold safety system with multiple protective mechanisms:
- 7500 Pa suction power ensures a secure hold on the glass
- Integrated emergency power supply in case of a power outage
- Shock absorption system to cushion collisions with the frame or obstacles
- Safety lanyard to prevent potential drops

The safety features resemble those of the WINBOT W1 Pro, whose 2,800 Pa suction power proved reliable. The MINI's higher 3,200 Pa power should therefore provide even more secure holding.
Technical specifications of the WINBOT series
| Feature | ECOVACS WINBOT MINI | ECOVACS WINBOT W1 Pro | ECOVACS WINBOT W2 PRO | ECOVACS WINBOT W2 PRO OMNI |
| Power supply mode | Network-connected | Network-connected | Network-connected | Battery mode or plug-in mode |
| Noise level | Approx. 63 dB | 72 dB | 63 dB | 63 dB |
| Suction power during operation | 3200 Pa | 2800 Pa | 2800 Pa | 2800 Pa |
| Maximum suction power (airflow compensation) | 7500 Pa | 2800 Pa | 5500 Pa | 5500 Pa |
| Battery capacity (station) | – | 650 mAh | 2600 mAh | 4500 mAh |
| Battery charging time (docking station) | – | – | – | Less than 3 hours |
| One-time workspace (Quick clean) | 30 m² | 60-minute spray duration | 55 m² | 55 m² |
| One-off clean area (deep cleaning) | – | Variable | 22 m² | 22 m² |
| Cleaning modes | Fast, deep, pinpoint | Fast, deep, pinpoint | Fast, Deep, Regular, Spot cleaning, Edge, Intense, Zones, Max | Fast, Deep, Regular, Spot cleaning, Edge, Intense, Zones, Max |
| Cleaning efficiency | 3 min/m² | Variable | 2 min/m² | 2 min/m² |
| Power failure protection | 30 minutes | 30 minutes | 30 minutes | 30 minutes |
| Ingress protection rating | 9 | – | 10 | 12 |
| Minimum window size | 22 x 25 cm | 30 x 40 cm | 30 x 40 cm | 30 x 40 cm |
| Robot weight | 1.3 kg | 1.53 kg | 1.6 kg | 1.6 kg |
| Robot dimensions (L x W x H) | 215 x 215 x 55 mm | 270 x 270 x 77.5 mm | 271 x 271 x 77 mm | 271 x 271 x 77 mm |
| Weight of the station | – | – | – | 5.6 kg |
| Station dimensions (L x W x H) | – | – | – | 312 x 215 x 327 mm |
| Price | 299 euros (RRP) | 289 euros (Amazon) | 449 euros (RRP) | €599 (RRP) |
The WINBOT MINI is available from 10 February 2025 in the colours Beige and Grey. The recommended retail price is €299, which places it slightly below the original price of the WINBOT W1 Pro (€289).
Source: ECOVACS press release





Comments